Please read and keep these
instructions for future use
Talk to us
If you have any questions or comments, or want some great tips to help
you get the most out of your products, join us online:
Facebook: www.facebook.com/morphyrichardsuk
Twitter: @loveyourmorphy
Address:
Stoney Lane
Prescot
Merseyside
L35 2XW
UK
CM172022MUK A3 Rev1
Contact us
Help & Advice
If you have any difficulty with this product, please contact our customer care
team who will be happy to help.
Email us: [email protected]
Visit us: www.morphyrichards.com/contactus
www.morphyrichards.com
Compact
Espresso Machine
Product Overview
Before First Use
Preheating (Optional)
Priming the Coffee Machine
IMPORTANT: It is impotant that prior to using the coffee maker for the first time that water is
flushed through the system and it is primed for making coffee.
NOTE: You may hear a pumping sound when water is passing through the system for the first
time. This is normal and is caused by the air escaping from the system. The noise will cease after
around 20 seconds.
17
18
19
1 32 4
5
6
8
7
9
16
21
12
13
14
10
11
15
20
Secure firmly
1
1
Ensure the Water Tank (8) is filled up to the
MAX line. Assemble the Espresso Coffee
Machine as above, ensuring the Removable
Drip Tray (15) is in place.
Without placing any Filters (17/18) into the
Filter Holder (19), place the Filter Holder into
the Brewing Head (10) and turn until at a right
angle to the Main Unit to lock into position
securely.
Ensure the Steam Control Dial (6) is in the off
position and press the On/Standby Button (1).
The One Cup and Two Cup Buttons (2/3) will
pulse as the unit is heating up.
Following action no.4, wait for the One Cup
and Two Cup Buttons (2/3) to illuminate
solidly. Then place a receptacle, capable of
holding 150ml, on the Drip Tray Grid (11) and
press the Two Cup Button (3).
When the One Cup and Two Cup Buttons
(2/3) illuminate solidly, place the Steam
Wand (12) into a mug or jug and slowly turn
the Steam Control Dial (6) until the water
dispenses - keep the Dial open for at least
30 seconds and close the Dial. Take care
performing this process as the hot water will
pulse into the receptacle, and it may emit
steam. Dispose of the water and repeat the
process a futher two times.
3 4
Water will pass through the system into the
receptacle, which then must be emptied.
Repeat a futher 3 times - the coffee
machine is now primed for making coffee.
For a hot Espresso, we recommend preheating the appliance before following the
instructions on the next page. Preheating ensures the Filter Holder and cup are warm
enough to enhance the coffee flavour.
If the coffee machine is switched off by the user by pressing the On/Standby button (1); or
if it automatically goes into standby mode (after 30 minutes), the machine can exit standby
mode by a single press of the On/Standby button. This will start pre-heating the machine,
and the One Cup and Two Cup Buttons (2/3) will pulse.
4
Fill the Water Tank (8) up to the MAX line.
Assemble the Espresso Coffee Machine as
above, ensuring the Removable Drip Tray (15)
is in place.
Place the Coffee Filter (17/18) into the Filter
Holder (19) without coffee in the Filter. Place
the Filter Holder into the Brewing Head (10) and
turn until at a right angle to the Main Unit to
lock into position securely.
Plug the Espresso Coffee Machine in and
press the On/Standby Button (1). The button
will illuminate and remain on until the coffee
machine is switched off again. The One Cup
and Two Cup Buttons (2/3) will pulse.
When the One Cup and Two Cup Buttons
(2/3) illuminate solidly, place your cup(s) on
the Drip Tray Grid (11). Press either the One
or Two Cup Button to dispense set amount,
approximately 50ml for one cup and 100ml
for two.
Remove the warmed Filter Holder (19), ready
for use (see steps 2 and 3 under ‘Using Your
Coffee Maker’).
Empty the water from your Espresso cup.
Next, follow steps 2 onwards under ‘Using
Your Coffee Maker’, using your preheated
Espresso cup.
If the Water Tank (8) runs dry, after re-filling
it may require two or more presses of the
One Cup and/or Two Cup Buttons (2/3) for
water to flow through the system to make
an espresso.
4
5 6
3
Re-filling the water tank
Plug the Espresso Coffee Machine in and
press the On/Standby button (1). The
button will illuminate and remain on until
the coffee machine is switched off again
or automatically goes into standby after 30
minutes. The One Cup and Two Cup Buttons
(2/3) will pulse.
When the One Cup and Two Cup buttons
(2/3) stop pulsing, place your cup(s) on
the Drip Tray. Press either the One or Two
Cup Button to dispense the set amount:
approximately 40ml for one cup and 80ml for
two. At the end of the dispensing time, the
machine will beep once.
You may press and hold the One or Two
cup Button to continue dispensing until the
button is released. See ‘Altering Dispense
Amounts’ for details.
Press the Steam button – the button will
pulse until the machine is up to Steam
temperature. When the button stops pulsing,
the Steam Wand is ready to be used.
Place the Steam Wand (12) into the milk,
slowly turn the Steam Control Dial (6) until
steam is dispensed. Adjust to your liking.
Press the Steam Button (4) to exit the
steam function. Serve the frothy milk. Press
the On/Standby Button (1) to turn off the
unit.
When enough froth has been produced,
turn the Steam Control Dial (6) to OFF.
Pour 100-200ml of chilled milk into a jug.
Allow the grinds/pod to cool. Empty the
coffee grinds, using the Filter Holder Clip (20)
to keep the Filter in place. Remove the Filter
and clean.
5
6
1
7
5 6
Using Your Coffee Maker
Using The Steam Wand
Your Espresso Coffee Machine uses espresso
ground coffee and comes with two suitable
Filters. The smaller one cup Filter (17) is for
single shot use and the larger two cup Filter
(18) is for double shot use.
Fill the Water Tank (8) up to the MAX line.
Assemble the Espresso Coffee Machine as
above.
21
5
Place the Espresso Filter into the Filter Holder
(19). Fill the Filter with fine espresso ground
coffee to just below the top rim and compact
it down with the Tamp Spoon (21).
3
3
4
100ml -200ml
2
Place the Filter Holder into the Brewing Head
(10) and turn until at a right angle to the Main
Unit to lock into position securely.
IMPORTANT: The Steam Wand must be cleaned after every use.
Allow the steam wand to cool before
cleaning. To clean, remove the nozzle (14)
and use a wet cloth to clean the Wand.
If another coffee is required after frothing milk, see ‘Notes on Using the Steam Wand’
for instructions on how to cool the machine.
Notes on Using the Steam Wand
If the unit is switched on with the Steam Control Dial (6) on, all buttons will flash. The Steam
Control Dial must be turned to the off position.
If you want to make another coffee after using steam, ensure the Steam Control Dial (6) is in
its off state and the One Cup and Two Cup Buttons (2/3) are pulsing, the unit is cooling down.
The buttons will illuminate solidly when it’s back down to temperature and ready to make coffee
again. This can be accelerated by turning the Steam Control Dial to on - water will pump through
and cool the system. Ensure there is a receptacle under the Steam Wand (12).
2
2
USAGE WARNING
ENSURE THE FILTER HOLDER (19) IS LOCKED INTO POSITION CORRECTLY AT A RIGHT ANGLE
TO THE MAIN UNIT AND SECURELY LOCATED IN THE BREWING HEAD (10) BEFORE USE.
WHEN FROTHING MILK, ENSURE THE STEAM CONTROL DIAL (6) IS OFF BEFORE REMOVING
THE STEAM WAND (12) FROM THE MILK.
U
P
T
O
2
Y
E
A
R
G
U
A
R
A
N
T
E
E
W
I
T
H
R
E
G
I
S
T
R
A
T
I
O
N
O
N
L
I
N
E
•
1 On/Standby Button
2 Two Cup Button
3 One Cup Button
4 Steam Button
5 Espresso Cups Holder
6 Steam Control Dial
7 Water Tank Lid
8 Water Tank
9 Filter Holder Lock
Position
10 Brewing Head
11 Removable Drip Tray
Grid
12 Steam Wand
13 Steam Wand Grip Tab
14 Steam Wand Nozzle
15 Removable Drip Tray
16 Drip Tray Full Indicator
17 Smaller One Cup Filter
(for single shot use)
18 Larger Two Cup Filter
(for double shot use)
19 Filter Holder
20 Filter Holder Clip
21 Tamp Spoon
Loading ...
Loading ...
Loading ...
