Loading ...
Loading ...
Loading ...
SDG7000A User Manual
54 / 133 WWW.SIGLENT.COM
Set The Waveform Parameters
The waveform parameter area of the Sequence Editor displays the basic parameters of the
currently active segment. The parameters are described in the table below. The setting method
refers to the sine wave.
Table 9-7 Description of waveform parameters of segment
Sequence
Length
The length of the segment can be different from the length of the
specified waveform, and can be set to be less than or greater than the
length of the waveform. When the length of the segment > the length
of the waveform, the device generates the segment by upsampling.
When the length of the segment < the length of the waveform, the
device generates the segment by downsampling. There are several
upsample and downsample methods (refer to table 9.9 and table
9.10), which can be specified by Setting > Increasing and Setting >
Decreasing.
Amplitude/High
Level
Offset/Low Level
Same as the sine wave
Repeat
The number of times this segment is repeated in the sequence,
ranging from 1 to 65535
The length of the segment should be
≥
64. If the length is less than 256, it
must be an integer multiple of 16. If it is greater than or equal to 256, there is
no limit.
Segment Operation
The main parameters information of each segment is displayed in the segment operation area,
and several segment operations are provided at the bottom, as shown in the following table:
：
Table 9-8 Description of segment operation
Operation
Description
Add
Add a new segment at the end of the sequence
Del
Deletes the currently active segment
Ins
Inserts a new segment above the currently active segment
Goto
Jump the segment whose index is specified in the following text box
Setting
Click Setting in the menu bar to enter the parameter setting page of the sequence. This page
provides the following parameter settings:
Loading ...
Loading ...
Loading ...