Loading ...
Loading ...
Loading ...
29
POSSIBLE PROBLEM EASY SOLUTION
Juice leaks between the rim of
the Juicer Cover and the Stainless
Steel Filter Disc
Try a slower juicing action by pushing the food pusher down more slowly (refer page 14, step 6). Fruit and
vegetables with a high water content (tomatoes and watermelon) should be juiced on low speed.
Filter Bowl Surround Sprays juice
out from spout Filter Disc
Try a slower juicing action by pushing the food pusher down more slowly.
When using Puree Extractor the
Filter Bowl Surround becomes full
and clogs the spout on the Filter
Bowl Surround.
Try using fruits with more water content to help flush through the contents. Additionally, try a slower juicing
action by feeding one piece in at a time and by pushing the food pusher down more slowly.
Juicer suddenly switches off
during juicing
The juicer has been stressed by overloading or stalling. Juicer will automatically activate the overload
protection button and the unit will switch itself off. When this happens it is recommended that the unit is
switched off at the power outlet and unplugged. Then press the Overload Protection Button found on the
bottom of the Motor Base. The safety device will then be reset and the Breville Professional 800 Collection
Juice Processor is ready for use again.
Red light flashing
This may indicate that the motor has been stress by Overheating with excessive load. The Juicer is fitted
with a self-resetting safety device which safeguards against overheating on the motor with excessive
loads. If overheating occurs, the juicer will automatically activate the overheating protection device and the
motor will switch itself off. When the overheating protection is activated, unplug the juicer from power outlet
for at least 15 minutes to allow the unit to cool. Then plug juicer into the power outlet and use as normal.
The Juicer will automatically stop operating if the motor is stalled. If this occurs, the light surrounding
the Start/Stop button will flash red. This is an electronic safety feature. Either too much food is being
processed at one time or the pieces are not small enough. Try trimming food, cutting food into smaller
pieces of even size and/or processing a smaller amount per batch. To continue juicing, unplug the juicer
from power outlet, reset the Juicer by pressing the Start/Stop button to ”Off”, then clear the feed chute,
finally turn the appliance back on by pressing the Start/Stop button to “ON”.
TROUBLE SHOOTING GUIDE (continued)
Loading ...
Loading ...
Loading ...