Loading ...
Loading ...
Loading ...
57 58
Types of Retractors
Automatic Locking Retractor
This retractor always locks.
It will automatically lock after slowly pulling the
seat belt out at least halfway and letting the belt go
back into the retractor 1-2 in. (2.5-5 cm).
Emergency Locking Retractor
See Step 5
“Check Latch Plates”
If the retractor does not lock, it is most likely an
Emergency Locking Retractor. These retractors
only lock during a sudden stop or collision.
You will need to determine if your seat belt’s latch
plate can lock the belt. See step 5, “Check Latch
Plates”.
Switchable Retractor
(most vehicles have this type)
This retractor can be switched to a locking mode.
You MUST have the retractor in the locking
mode to use the seat belt with this car seat.
Switching to locking mode: Slowly pull the
shoulder belt all the way out, then let it go back in
1-2 in. (2.5-5 cm).
As it goes back in, you will most likely hear a
ratcheting sound.
Gently pull the belt to see if it has locked. You will
not be able to pull any more belt out if the lock has
engaged.
Check Latch Plates
Latch plates are the part of the seat belt that goes into
the buckle.
To see if the latch plate locks:
1. Buckle Vehicle Belt
2. Firmly Tug Lap Portion of Seat Belt While Pulling It Up
If the vehicle belt does not slide through the latch plate,
it’s locked.
If the latch plate slides up and down the vehicle belt, it is
a sliding latch plate.
Sliding latch plates easily slip between the lap and
shoulder portions of the belt.
Locking
Latch
Plate
Emergency
Locking
Retractor with
a Sliding Latch
Plate
Never Use the Following With
This Car Seat:
• Emergency Locking Retractor Lap Only Belt
• Inflatable Seat Belts
5
Loading ...
Loading ...
Loading ...