Loading ...
Loading ...
Loading ...
10
9
Installing Base with
LATCH: Lower Anchor Belt
1
2
3
Place Base in Vehicle Seat
Squeeze the rotation handle
and swivel the seat to face you
in side view.
Squeeze the release handle
located on the front of the car
seat while lifting the car seat
off the base and flipping it over
to the opposite side.
Lay Top Tether Strap
Over the Vehicle Seat
You will be installing the top
tether strap in steps 6 & 7.
Review the vehicle owner’s
manual for the tether anchor
locations.
Take Lower
Anchor Belt Out of
Storage Location
4
Weave Lower Anchor Belt
In & Out of Belt Path
Then attach lower anchor
hooks to the vehicle’s lower
anchor.
Before installing the car seat in your vehicle, check to see if you need to adjust the
buckle position for your child.
See page 21 for Rear-Facing buckle positions.
See page 28 for Forward-Facing buckle positions.
If LATCH: lower anchors are not an option or if your child weighs more than 25 lb
(11 kg), in Rear-Facing Mode or 30 lb (14 kg) in Forward-Facing Mode you
MUST use the vehicle seat belt system to install the car seat.
Review Vehicle Owner’s Manual
Determine what kind of vehicle belts your car has and how to use them to lock a
car seat in place OR where LATCH: lower anchor seating positions are located in
your vehicle
.
DO NOT use both the LATCH: lower anchor belt and vehicle belt at the same
time to install the car seat. The car seat is attached to the base via cable
wires and should NOT be removed.
When top tether anchors are available, you MUST ALWAYS attach, adjust,
and secure the tether (top anchorage) strap when installing the car seat in
all modes.
DO NOT leave child restraint in Side-Facing mode while vehicle in is motion.
Even when unoccupied, this child restraint
MUST be firmly secured to the
vehicle with the lower anchor belt or with the vehicle seat belt in Rear-
Facing or Forward-Facing mode.
WARNING:
Vehicle Belt Lock Off
MUST BE Closed
BEFORE Routing Lower
Anchor Belt
continued on next page
Loading ...
Loading ...
Loading ...