Loading ...
Loading ...
Loading ...
87
8
7
Locate Vehicle Tether
Anchors
Locations vary by vehicle.
Review your vehicle owner’s
manual for top tether anchor
locations and how to route
the tether belt when there are
vehicle headrests.
If your car has a vehicle belt that can switch to locking mode, you
MUST use it to lock the belt.
Switching vehicle belt to locking mode: Slowly pull the shoulder
belt all the way out, then let it go back in 1-2 in. (2.5-5 cm).
As it goes back in, you will most likely hear a ratcheting sound.
Gently pull the belt to see if it has locked. You will not be able to pull
any more belt out if the lock has engaged.
FINISHED!
1
2
3
1. Tether Installed? If it is not installed, see steps 7 & 8.
2. Belt Tension Indicators Completely Green?
If they are not green, see steps 3-6.
3. Car Seat Cradle Side-Facing As Shown? If it is not side-facing,
squeeze the rotation handle and move it into side-facing position.
Rear-Facing Child Fit: pages 19-23.
Forward-Facing Child Fit: pages 26-30.
Booster Seat into Base Install: pages 42-45.
6
Close Belt Lock Off
Both indicators will turn
completely
green when
vehicle belt is properly
installed.
If the base moves more than 1 in. (2.5 cm) side to side at
the belt path, you can try:
• Pulling the belt tighter; OR
• Reinstalling the base; OR
• Changing to a different seating location; OR
• Switching to a different install method (LATCH: Lower
Anchor Belt).
Flip Car Seat Over
Push down on the front of
the car seat to lock into
place.
Attach and Tighten Top
Tether Strap Until Tether
Door Is Flush With Base
As Shown
Loading ...
Loading ...
Loading ...