Loading ...
Loading ...
Loading ...
16
12. “ ” PROGRAMMING AND SELECTING
In
you can select beverages customised to your per-
sonal tastes. If the beverages have not yet been programmed,
the appliance will request the customisation procedure before
proceeding with delivery:
1. Press
(B13);
2. Press the selection arrows (B2 and B4) until the required
beverage is displayed between the two lines;
Unprogrammed beverages:
3. Press OK (B3) to select;
4. Beverages with coee: "Program aroma" appears
on the display. Press the selection arrows (B2 and B4) or
(B7) until the required aroma is selected. Press OK.
"Program coee" appears on the display together with a
bar which gradually lls as delivery progresses. When the
required quantity is reached, press OK.
5. Cappuccinos and milk-based coees: After select-
ing the aroma, "Program milk" appears on the display
together with a bar which gradually lls as milk delivery
progresses. When the required quantity is reached, press
OK.
6. The appliance then makes the coee. Press OK to interrupt
delivery when the required quantity of coee is reached.
7. "Save parameters?": to save the settings, press OK (other-
wise press ESC - B2 or B5).
8. "Parameters saved" (or "Parameters not saved"). The ap-
pliance is ready for use again.
Programmed beverages:
3. Press OK (B3) to select;
4. Preparation begins according to the previously pro-
grammed settings.
Please note:
Two cups of a beverage can only be selected when the corre-
sponding single beverages have been programmed.
13. DELIVERING HOT WATER
Important! Danger of burns.
Never leave the machine unattended while delivering hot water.
1. Make sure the hot water spout (C6) is attached correctly;
2. Place a container under the water spout (as close as possi-
ble to avoid splashes) (g. 5);
3. Press
(B12) and scroll through the beverages
in the menu by pressing the selection arrows (B2 or B4)
until "Hot water" is selected;
4. Press OK (B3). A progress bar appears and gradually lls as
preparation proceeds;
5. The machine delivers about 250 ml of hot water, then
delivery stops automatically. To interrupt hot water deliv-
ery manually, press the selection arrow corresponding to
"STOP" (B4) again.
Please note:
• If "Energy Saving" mode is active, you may have to wait a
few seconds before hot water is delivered.
• The quantity of water delivered can be customised (see
section “8.3 Program beverages”).
14. CLEANING
14.1 Cleaning the machine
The following parts of the machine must be cleaned regularly:
- the appliance’s internal circuit;
- coee grounds container (A11);
- drip tray (A15) and condensate tray (A10);
- water tank (A17);
- coee spouts (A9);
- pre-ground coee funnel (A4);
- infuser (A20), accessible after opening the infuser door
(A19);
- milk container (D);
- hot water/steam connection nozzle (A8);
Important!
• Do not use solvents, abrasive detergents or alcohol to clean
the coee machine. With De’Longhi superautomatic coee
machines, you need not use chemical products to clean the
machine.
• None of the components of the appliance can be washed
in a dishwasher with the exception of the drip tray grille
(A14) and milk container (D).
• Do not use metal objects to remove encrustations or coee
deposits as they could scratch metal or plastic surfaces.
14.2 Cleaning the machine's internal circuit
If the appliance is not used for more than 3/4 days, before using
it again, we strongly recommend switching it on and:
- performing 2/3 rinse cycles by pressing (B5);
- delivering hot water for a few seconds (section “13. Deliv-
ering hot water”).
Please note:
After cleaning, it is normal for the coee grounds container
(A11) to contain water.
14.3 Cleaning the coee grounds container
When "Empty grounds container" appears on the display (B1),
the grounds container must be emptied and cleaned. The ap-
pliance cannot be used to make coee until you have cleaned
the grounds container (A11). Even if not full, the empty grounds
container message appears on the display 72 hours after the
Loading ...
Loading ...
Loading ...