Loading ...
Loading ...
Loading ...
3. Camera Operations: Menu Operations
58
Checking the Status using the Info Category
You can check the status of media and the battery, and check the contents of warnings and
errors that are issued using the Info category. The contents of the display update in realtime as
the status of the unit changes.
The Info category consists of the following nine information pages. Turn the MENU dial to switch
the page.
No. Page Description
1 Camera Condition Displays warning messages and error messages. When
there are no messages, “All Systems are OK” is displayed at
the top of the display area.
2 Firmware Displays the serial number and firmware version of the unit.
3 License Displays the name and installation status/validity of option
software licenses. If an option is not added, “Not Installed”
or “Expired” is displayed for the installation status.
4 System Displays the following system information.
• Date and time
• Fan rotation speed
• Sensor detection temperature
• Hours meter
• IP Address
[Notes]
• If the sensor detection temperature reaches 65 °C (149 °F), a high
temperature warning message is issued.
• “0.0.0.0” is displayed if the IP address cannot be obtained.
5 Battery Displays the following battery information.
• Detected battery name or type
• Remaining capacity (%)
• Estimated remaining time
• Remaining capacity (Ah)
• Voltage (V)
• Number of times that the battery has been charged
• Power source
• Supplied power source voltage
6 Media Displays the remaining capacity, remaining recording time,
and lifespan data of AXS memory cards and SD cards.
No. Page Description
7 Lens Displays the following information for the lens attached to
the unit.
• Lens model name
• T value of iris
[Note]
The F-stop value is displayed instead of the T-stop value if the
T-stop value cannot be obtained.
• Focal length
• Focus distance
• Depth of field
• Serial number
8 Network Displays the network connection setup information.
• Status (LAN/Wireless Access Point/Wireless Station/Off)
• IP Address
• SSID
• MAC Address
[Note]
“0.0.0.0” is displayed if the IP address cannot be obtained.
9 False Color Setting Table Displays the following False Color setup information.
• Set color
• Setting minimum value to maximum value
• Description
[Note]
If the setting minimum value to maximum value is different from
the initial values, the text color becomes gray.
Loading ...
Loading ...
Loading ...