Loading ...
Loading ...
Loading ...
20
en | Quick setup
RE3 UHF
Wireless
20
21.06 | 3 | F.01U.362.808 Installation manual Electro-
Voice
c. Directly aim the transmitter sync port at the receiver sync emitter.
d. Press the sync button on the front of the receiver to begin the syncing process
(green LED flashes on receiver).
e. Hold the transmitter in place until the sync process is complete. Upon successful
sync the transmitter will be tuned to the receiver and ready for use.
6.4 Ensure transmitter input sensitivity is set for best signal level
a. While viewing receiver AF meter activity, perform as you would in a normal
performance using proper microphone placement.
b. Observe the AF meter LED segments. Ideal level should show all green LEDs and
the yellow LED lit on emphasis peaks. An occasional red LED is OK, but a constant,
solid red LED should be avoided.
c. Adjust transmitter input sensitivity until item b above is achieved.
Upon successful completion of this section, your set is ready for operation.
Loading ...
Loading ...
Loading ...