Loading ...
Loading ...
Loading ...
39
38
ENGLISH
ENGLISH
OVEN MITTS OR A KITCHEN TOWEL WHEN RELEASING PRESSURE.
b. Natural Release Method: Release the pressure by shutting the unit off
completely, this allows the pressure to drop naturally without turning the
pressure regulator knob to STEAM. Natural Release Method takes several
minutes, during which the food inside continues cooking. Some recipes (such
as quinoa) benefit from extra cooking time. You know when the pressure has
been released because the floating valve drops and you can open the lid.
11. Once all the pressure is released, remove the lid by turning it clockwise, lifting it
and tilting it away from yourself to avoid getting burnt by any remaining steam
or hot water condensation dripping from the inner portion of the lid.
WARNING: AFTER COOKING, THE REMOVABLE COOKING POT IS HOT. USE
POT HOLDERS, OVEN MITTS, OR A KITCHEN TOWEL TO HANDLE IT OR LET
IT COOL DOWN BEFORE REMOVING.
(1) (2) (3)
(4)(5)
Mute Feature
If you would like to disable all the beeps from the multi-cooker, you may do so by
pressing and holding the ADJUST button until the display shows the Mute Icon. All
beeps, including button presses and unit notification sounds, become disabled for
the duration of the use.
To unmute the multi-cooker, press and hold the ADJUST button until the Mute Icon
disappears and the unit emits a beep: this unmutes all beeps.
Note: If you mute the multi-cooker and then unplug it after use, this disables the
mute feature and the unit becomes unmuted at its next use.
Cleaning and Maintenance
Do not wash any parts of the multi-cooker in the dishwasher except for the
removable cooking pot. Always wash the removable cooking pot thoroughly after
every use, or if it has not been used for an extended time.
1. Unplug the multi-cooker and let the unit cool before cleaning.
2. Remove the removable cooking pot and wash with warm soapy water or in the
dishwasher. However, hand washing is always recommended. Rinse and dry
thoroughly.
3. Wipe the body of the unit with a clean damp cloth and rinse the lid with warm
water and soap. Do not submerge the multi-cooker in water.
NOTE: To remove odor from the inside of the lid, clean it with water and vinegar
(1:1 ratio).
4. Remove the condensation reservoir by pulling it down. Wash with warm, soapy
water. Rinse and dry thoroughly. Replace by pushing it back into place.
5. Turn the lid upside down; grip the silicone gasket, and pull up to remove. Clean
the silicone gasket with warm soapy water. Rinse and dry thoroughly. Replace
the gasket by positioning it inside the edge of the lid and pushing it down.
Make sure the groove in the center of the gasket is positioned around the metal
ring on the inside edge of the lid.
NOTE: The silicone gasket must always be positioned correctly on the underside
of the lid; otherwise, the unit cannot work. Check periodically to make sure that
it is clean, flexible, and not cracked or torn. (See “Getting Started” section in this
manual.)
6. If the silicone gasket appears damaged, cracked or torn, do not use the unit
and contact the Zavor Customer Service Department at 1-855-928-6748 or
visit the Zavor website to purchase a new silicone gasket at www.zavoramerica.
com.
7. For optimal performance, the inside of the cooker, in the area under the
removable cooking pot where the temperature sensor and heating pad are,
must be cleaned after each use. Wipe with a soft damp cloth and be sure to dry
thoroughly.
8. Never use abrasive cleaners or scouring pads to clean any of the parts.
Cleaning the Pressure Regulator Knob
ALWAYS check that the pressure regulator knob and the pressure safety valves are
in good working order before each use.
1. After the unit has cooled, remove the lid from the multi-cooker.
2. Press down and turn the pressure regulator knob counterclockwise past
STEAM to CLEAN and carefully lift to remove. Look through the removed knob
to make sure there is no particle build-up, and put it under running water to
clean.
3. Turn the lid over and place it on a table top. Pull out the anti-blocking case.
Using a brush or toothpick, check and remove any food or foreign particles
that may be lodged in the pressure discharging tube that is inside the anti-
block cover. Replace the anti-blocking case pressing it down back into place.
4. Replace the pressure regulator knob by lining the CLEAN dot with the dot on
the lid of the unit and turning clockwise until it goes into place. The dot on the
base of the pressure regulator should line up with the PRESSURE or STEAM
setting on the pressure regulator knob. If it doesn’t, remove the knob again and
try realigning the dots the other way around.
Loading ...
Loading ...
Loading ...