Loading ...
Loading ...
Loading ...
GEAppliances.com
Possible Causes What To Do
Range Locked or LOC The controls have • Seethe Control Lockoutsection to unlock.
On appears in the oven been locked.
display or LC appears
in the surface display
Control signals after Youforgot to enter a • Touch the BAKE pod and desired temperature or
entering cooking time bake temperature or the SELFCLEAN pod and desired clean time.
or start time cleaning time.
Display goes blank A fuse in gour home mag be • Replacethe fuse or resetthe circuit breaker.
blown or the circuit
breaker tripped.
The clock is in the • See the Special features of your oven control section.
black-out mode.
Displag flashes Power failure. • Reset the clock.
Unable to get the Oven control pads were • The BROIL HI/LO and BAKE pods must be touched at
displag to show "SF" not touched properlg, the same time and held for 3 seconds.
"Probe" appears in This is reminding gou to • Enter a probe temperature.
the displag enter a probe temperature
(onsome models) after plugging in the probe.
Power outage, Power outage or surge. • Reset the clock. If the oven was in use, you must reset
clock flashes it bu touching the CLEAR/OFF pad, setting the clock
and resetting anu cooking function.
Steam from the vent When using the ovens, • This is normal.
it is normal to see steam
coming out of the oven
vents. As the number of racks
or amount of food being
cooked increases, the amount
of visible steam will increase.
"Burning'or "oily" This is normal in a new oven • To speed the process, set a self-clean cgcle for a
odor emitting from and will disappear in time. minimum of 3 hours. See the Using the self-cleaning
the vent upper and lower ovens section.
Strong odor An odor from the insulation • This is temporarg.
around the inside of the oven
is normal for the first few times
the oven is used.
Fan noise A convection fan meg • This is normal. To maximize cooking evenness,
automaticallg turn on the fan is designed to operate in both directions,
and off. with a pause in between.
• The convection fan will operate during preheat
of the bake cycle. The fan will turn off after the oven
is heated to the set temperature. This is normal.
A cooling fan mag • This is normal. The cooling fan will turn off and on
automaticallg turn on and off. to cool internal ports. It may run after the oven is
turned off.
47
Loading ...
Loading ...
Loading ...