Loading ...
Loading ...
Loading ...
TPMS Service Operations Check Operations
58
Main Section
Column 1 – displays the wheel positions
Column 2 – displays sensor IDs
Column 3 – displays the tire pressure
Column 4 – displays the sensor frequency
Column 5 – displays the tire temperature
Column 6 – displays the sensor battery condition
NOTE: You can choose a unit on the table header according to your
preference.
To check TPMS sensor
1. Tap Check Tab.
2. Tap the desired wheel position on the vehicle thumbnail. Hold the
Display Tablet with its top right corner (with the TPMS service
symbol) close to the tire sidewall near the valve stem, and then
press the Trigger button.
The Display Tablet will send low frequency signal to trigger the
sensor.
NOTE: The Display Tablet will perform TPMS check in a sequence of FL (front
left), FR (front right), RR (rear right), RL (rear left) and SP (spare, if any).
3. The sensor data of the selected wheel will display on the table of
the screen once the sensor is successfully activated and decoded.
4. Tap Back to exit.
NOTE: Wheel with a feedback icon, red or green vertical rectangle, indicates
sensor trigger has been finished. Refer to Table 5-1 for details.
Loading ...
Loading ...
Loading ...