Loading ...
Loading ...
Loading ...
Oscilloscope Operations Screen Layout and Operations
126
16.4.3 Measurement Grid
The 2 control features - Voltage per division and Time per division – enable
the users to adjust the scope settings to suit the particular test measurement.
Figure 16-7 Sample Measurement Grid
Voltage per division – shown down the left side of the screen, referred to
as the Y-axis
Time per division – shown along the bottom of the screen, referred to as
the X-axis
Multiple Scope Channels
The MaxiScope software features multiple channel display which enables
more than one waveform to be displayed at the same time. It is useful for
making comparisons among different signals. The voltage per division for
each channel is adjusted individually while the time base per division is the
same for all channels.
To adjust the voltage scale
1. Tap the specific Y-axis of the corresponding channel to enable scale
adjustment. The selected Y-axis is highlighted with thicker dividing
line.
2. Adjust the voltage scale of the selected channel with the typical
2-finger zoom gestures.
3. The 0 volts is hinted with a pointer reference line. Slide the pointer
Loading ...
Loading ...
Loading ...