Loading ...
Loading ...
Loading ...
VCI Manager Operations BT Pairing
97
during the synchronization procedure. Make sure the Display Tablet has
sufficient battery level or is connected to an AC/DC power supply.
To pair the VCI device with the Display Tablet
1. Power on the Display Tablet.
2. Insert the 16-pin vehicle data connector of the MaxiVCI V100 to the
vehicle data link connector (DLC).
3. Tap the VCI Manager application on the MaxiSys Job Menu of the
Display Tablet.
4. Select BT from the connection mode list.
5. Tap the Scan button at the top right corner. Now the device starts
searching for available pairing units.
6. The device name may display as Maxi suffixed with a serial number.
Select the required device for pairing.
7. When paring is successfully done, the connection status displayed
to the right of the device name is shown as Paired.
8. Wait a few seconds, and the VCI button on the system Navigation
bar at the bottom of the screen shall display a green tick icon,
indicating the Display Tablet is connected to the VCI device.
9. Tap the paired device again to unpair it.
10. Tap the Home button on the top left to return to the MaxiSys Job
Menu.
NOTE: A VCI device can be paired to only one Display Tablet each time,
and once it’s been paired, the device will not be discoverable for any
other unit.
11.2 Update
Before update the VCI software, please make sure the Display Tablet network
connection is stable.
Loading ...
Loading ...
Loading ...