Loading ...
Loading ...
Loading ...
ENGLISH
18
• To maintain the accuracy of your work, check the
calibration of the laser often. Refer to Calibrating theLaser.
• Calibration checks and other maintenance repairs can be
performed by DeWALT service centers. Two free calibration
checks are included under the DeWALT One Year Free
ServiceCon tract.
• When the laser is not in use, store it in the kit boxprovided.
• Do not store your laser in the kit box if the laser is wet. Dry
exterior parts with a soft, dry cloth and allow the laser to
airdry.
• Do not store your laser at temperatures below 0˚F (‑18˚C)
or above 105˚F (41˚C).
WARNING: Never use solvents or other harsh chemicals
for cleaning the non‑metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the unit; never immerse any
part of the unit into a liquid. Never use compressed air to
clean thelaser.
TROUBLESHOOTING
Height of Instrument Alert
The DW074LR and DW079LR/LG have a built‑in alarm feature
that alerts the operator if the unit is disturbed after the unit has
self‑leveled. The laser unit will stop rotating, the control panel
LED indicator light will flash, and the beeper willsound.
Turning the Laser Off
Press the the power button for 3sec to turn the laser off. The
power LED indicator light will no longer beilluminated.
To Reset The Laser Unit for Continued Use
• Turn the unit off and back on again using the power button
on the laser unit controlpanel.
NOTE: Always recheck the laser setup after the Height of
Instrument Alert (hi mode / bump alert) hastriggered.
Service and Repairs
NOTE: Disassembling the laser level will void all warranties on
theproduct.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by authorized service
centers. Service or maintenance performed by unqualified
personnel may result in a risk of injury. To locate your nearest
DeWALT service center call 1–800–4‑DeWALT (1–800–433–
9258) or visit our website: www.DeWALT.com.
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRANTY SERVICE: Registering your product will help
you obtain more efficient warranty service in case there is a
problem with yourproduct.
• CONFIRMATION OF OWNERSHIP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof ofpurchase.
• FOR YOUR SAFETY: Registering your product will allow us
to contact you in the unlikely event a safety notification is
required under the Federal Consumer SafetyAct.
Register online at www.dewalt.com/register.
Three Year Limited Warranty
DeWALT will repair, without charge, any defects due to faulty
materials or workmanship for three years from the date of
purchase. This warranty does not cover part failure due to
normal wear or tool abuse. For further detail of warranty
coverage and warranty repair information, visit www.DeWALT.
com or call 1–800–4‑DeWALT (1–800–433–9258). This
warranty does not apply to accessories or damage caused
where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have other
rights which vary in certain states orprovinces.
In addition to the warranty, DeWALT tools are covered by our:
1YEAR FREE SERVICE
DeWALT will maintain the tool and replace worn parts
caused by normal use, for free, any time during the first year
afterpurchase.
90DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your
DeWALT Power Tool, Laser, or Nailer for any reason, you can
return it within 90days from the date of purchase with a receipt
for a full refund – no questionsasked.
RECONDITIONED PRODUCT: Reconditioned product is
covered under the 1Year Free Service Warranty. The 90Day
Money Back Guarantee and the Three Year Limited Warranty do
not apply to reconditionedproduct.
FREE WARNING LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1–800–4‑DeWALT or
visit your local service center for a freereplacement.
Loading ...
Loading ...
Loading ...