FP2200 User Manual

Loading ...

16 17

want to slice crosswise. Position the food pusher insert at the

top of the stack before pressing the ON switch. Use moderate,

steady pressure on the food pusher (or the food pusher insert) to

push the items down when the plate starts turning. If the pressure

is not steady, the cut items may vary in thickness. Avoid heavy

pressure, which may deform the plate.

2 – For lengthwise strips, stack the food items vertically. Vertical

insertion may also be used to produce nely chopped celery,

onions, etc. Quarter onions before loading the feed tube.

TROUBLESHOOTING

This section describes potential problems and the correct

solutions for them. Problems that cannot be solved with the

guidelines listed below should be referred to one of your local

distributors for assistance. A listing of authorized service

agencies is supplied with each Waring food processor.

Unit does not start when assembled correctly

 •Pulltheplugandtrypluggingintoanotheroutlet.

 •PressONbuttontoON.

 •Makesurethebowlisproperlypositionedonthemotorbase,

that the bowl or chute cover is attached properly, and that

the safety interlock tab on the cover has properly engaged

the safety interlock switch.

Unit stops running during processing

 •Theunitmayhaveoverheated.RefertoResettingThermal

Protection section (page 13).

 •Turnunitoffandunplug.

 •Removebowlattachment.

 •Removefoodbeingprocessedfrominsidethebowland

discard.

 •Allowunittocoolfor5minutes.

 •Reassembleunit,andrunrstwiththebowlempty,thenput

food into the bowl and try again.

When dicing different types of produce, follow the above

procedure to clean out the dicing grid between operations.

Shredding

The FP2200 is equipped with the CAF20 – 3/16" Shredding Plate.

This plate is for processing cheeses such as mozzarella, jack,

swiss, or other soft food items. It is also used for making cole

slaw, shredded carrots or coconut, and potato strings or hash

browns.

To shred vegetables: Choose from the following options,

depending upon the quantity and/or shape of the items to be

shredded and the desired length of shreds:

1 – With the motor off, load the feed tube with large quantities

and/or items that you want to shred lengthwise. Position the food

pusher at the top of the stack before pressing the ON switch. Or,

insert the food pusher into the empty feed tube, remove the small

pusher, and load smaller quantities, and/or items that you want to

shred crosswise. Position the food pusher insert at the top of the

stack before pressing the ON switch.

2 – For longer, lengthwise shreds, stack the vegetables

horizontally. For shorter, crosswise shreds, insert the vegetables

vertically.

To shred cheese for pizza, etc.: Cut well chilled cheese into

pieces that will t into the feed tube. Load the cheese into the

feed tube, insert the food pusher and press the ON switch. Press

down moderately hard on the pusher. If cheese is allowed to

“bounce”, the results will be small, irregular pieces.

Slicing

The FP2200 is equipped with the CAF12 – 1/8" and CAF18 – 1/2"

slicing plates.

Choose from the following options, depending upon the quantity

and/or shape of the items to be sliced and the desired length of

slices:

1 – With the motor off, load the feed tube with large quantities

and/or items that you want to slice lengthwise. Position the food

pusher at the top of the stack before pressing the ON switch.

Or, insert the pusher into the empty feed tube, remove the small

pusher, and load with smaller quantities, and/or items that you

Loading ...

User Manual - Page 9