Waring Commercial FP2200 User Manual

Loading ...

10 11

HOW TO USE

Continuous use

For continuous processing, use the ON button.

Pulsing

The pulsing function is intended for use with the S-blade in the

work bowl.

 •Forrapidon-offoperation,calledpulsing,usethePULSE

button. The motor runs as long as you hold the button down;

it stops when you release it.

 •Youcontrolpulsing.Youcontrolthedurationofeachpulse

by the amount of time you hold the button. You control

the frequency of pulses by the rate at which you press the

button. The interval between pulses must be long enough to

allow everything in the work bowl to fall to the bottom.

 •Pulsinggivesyouprecisecontroloverchopping,mincing,

blending and mixing. You can process food to any texture or

consistency you want, from coarse to ne.

 •Pulsingisalsousefulinprocessinghardfoods.Pulsethe

food a few times to break it up into smaller parts. Then

proceed with continuous use after the pieces are broken up

and easier to process.

 •AlwaysusethePULSEbuttonforpulsing.Nevermovethe

bowl (or chute) and cover assembly on or off to control

pulses. It is less efcient and could damage the machine.

Turning of f

Always turn the machine off with the OFF button and wait until

the blade or disc comes to a complete stop before removing

the pusher assembly. The motor stops within seconds after the

machine is turned off.

tool and lift it straight up. Be careful not to touch the blades,

as they are extremely sharp.

 •Removethecontinuousfeedchutefromthemotorbase.If

the chute is pointing in the 4-o’clock position, just lift it up.

If not, rotate clockwise (left) to disengage the tabs on the

bottom of the chute platform (motor base) from the slots on

the bottom of the continuous feed chute.

OPERATING THE CONTROLS

 •Plugthemachineintoanelectricaloutlet.Theoutletmustbe

120 V, 60Hz.

 •Thecontrolpanelprovidesyouwiththreecontrolfunctions:

PULSE

OFF

How they work:

ON: Press the ON button to start the motor and maintain

continuous operation.

PULSE: Turn on the motor, press the PULSE button, then

release. The motor will run as long as you hold the button, it

stops when you release it. Try it a few times.

OFF: When the motor is continuously running (by pressing

the ON button) you can turn the motor off by pressing the

OFF button.

Loading ...

FP2200 Waring

User Manual - Page 6