Loading ...
Loading ...
Loading ...
Controlling the Sound of a Performance
EN-99
3.
Press ACTV DSP.
This enables Active DSP and displays the Active DSP screen.
• Keyboard tone effects and knob functions are switched to dedicated Active DSP settings.
4.
Use CHG PART to select the part whose effect you want to change.
This causes the selected part’s indicator (“U1”, “U2”, “L”) to appear in the upper left of the display.
• Each press of CHG PART cycles between parts whose effect will be changed.
• Under initial default settings, effects are applied to the UPPER1 and UPPER2 parts only, so
even if you change the effect for the lower part, that effect is not applied. For information about
applying an effect to the lower part, see “To change the part where the effect is applied” on page
EN-101.
5.
Rotate the dial to change the effect to apply to the part.
• You can select an effect value from 1 to 101.
• The “1:Tone” setting applies effects that depend on the selected keyboard tone. The knob
function also changes to the recommended parameters for that effect.
• After you rotate the dial once to select a value, you can change the value further using – and +.
• To go back to the previous screen, press BACK.
Loading ...
Loading ...
Loading ...