1111 W. 35th Street, Chicago, IL 60609 USA
773.869.1282 • [email protected]
www.tripplite.com
18-03-366 95-34CC
Copyright © 2018 Tripp Lite. All trademarks are the sole property of their respective owners. Photos and illustrations
may differ slightly from actual products. Tripp Lite has a policy of continuous improvement. Specifications are subject
to change without notice. Life-Support Statement:
Tripp Lite does not recommend the use of any of its products in
any life-support application in which a malfunction or failure of a Tripp Lite product could cause failure or significantly
alter the performance of a life-support device.
Tripp Lite’s medical-grade solutions ensure regulatory compliance throughout
healthcare facilities – both inside and outside patient care vicinities!
Why is compliance with medical-grade
standards so important?
Patient safety depends on it! UL 60601-1 and UL 1363A are safety standards
required for all electrical devices that could potentially come into contact
with patients or staff in patient care vicinities – an enormous category that
encompasses everything from lamps and televisions to computers and
diagnostic equipment. Just having a hospital-grade plug isn’t enough to
achieve medical-grade compliance. Medical-grade UPS systems, power
strips and surge protectors, mobile power solutions, isolation transformers
and USB chargers combine hospital-grade plugs and outlets with special
shock-prevention measures to achieve full medical-grade compliance.
How can Tripp Lite help you achieve
medical-grade compliance?
Tripp Lite’s medical-grade UPS systems, power strips and surge protectors,
mobile power solutions, isolation transformers and USB chargers provide
UL 60601-1 or UL 1363A compliance, including medical, diagnostic-imaging,
pharmaceutical, lab and EMS equipment, mobile cart and telemedical
equipment, computer/information systems equipment and telecom/security
equipment. Tripp Lite offers the broadest range of medical-grade power
protection and power supply solutions available.
Tampa General Hospital
The Goal
Ken Lange, Senior Electrical Engineer for
Tampa General Hospital, was managing
a project to put computer stations (a
computer and a monitor) next to 200
patient beds. However, the combined
cumulative leakage of each computer
station was too high. Lange needed to
ensure that the stations were connected
to highly reliable power sources that were
UL 60601-1 compliant (reducing leakage
current below 100 microamps). Ultimately,
the stations’ compliance would be
verified by the authority that monitors
compliance in Tampa General Hospital’s
area – the Florida Agency for Health Care
Administration (AHCA).
The Solution
Lange turned to Tripp Lite’s medical-
grade isolation transformers to power
his computer stations. The isolation
transformers not only reduced leakage
current and ensured UL 60601-1, NEC
and AHCA compliance, they also satisfied
several other needs. The isolation
transformers protected the computers from
potential damage and disruption caused by
transient surges and line noise. Additionally,
their compact, durable all-metal cabinet
(and the use of a wall-mount bracket)
allowed Lange to reduce the profile of his
equipment and conserve valuable floor
space within patient rooms.
TRIPP LITE MEDICAL-GRADE COMPLIANCE SUCCESS STORY
Distributed By:
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
HEALTHCARE / MEDICAL SOLUTIONS
Healthcare/Medical Solutions
for Patient Care Vicinities
Tripp Lite manufactures power protection, power supply and
regulatory compliance solutions for use in hospitals and other
healthcare facilities worldwide. Medical-grade UPS systems,
power strips and surge protectors, mobile power solutions,
isolation transformers and USB chargers support a wide range
of equipment and applications both inside and outside patient
care vicinities.
• 120 V and 230 V Solutions
• Regulatory Compliance / Patient Safety Solutions
(UL/IEC 60601-1, UL 1363A and More)
• OEM Integration
APPROVED FOR PATIENT CARE VICINITIES MEDICAL‑GRADE COMPLIANCE
Tripp Lite Helps You Achieve Medical-Grade Compliance
(UL 60601-1 or UL 1363A)
Regulatory Compliance Quick Reference
Standard Description Application
UL 60601-1 Shock-prevention measure required for all
devices that can potentially come in contact
with patients and staff.
Patient care
vicinities
UL 1363A Basic safety standard for power strips
integrated as components of a larger system
where they supply power to equipment in a
movable assembly that is rack, table or
pedestal-mounted.
Mobile applications
inside and outside
patient care
vicinities
UL 1363 Basic safety standard for power strips that
stand alone and are NOT designed as
components of a larger system.
Lab applications
and administrative
areas
UL 1449 Surge protector safety standard for units used
outside of patient care vicinities.
Administrative
areas and business
offices
Tripp Lite provides regulated power, battery backup and regulatory code compliance
to support a wide range of healthcare applications.
Clinical Lab Equipment Mobile Power / Telemedicine Healthcare IT Equipment
Ophthalmology Equipment Diagnostic Imaging Systems Medical Equipment
Model AC Input Charging Output UL Compliance Charging Port
U280‑001‑W2‑HG
120V, 50/60 Hz 2.5A / 13W UL 60601-1 1 USB Type-A
The First USB Wall Charger Certified for Patient Care Vicinities
UL 60601-1 Compliant
• Approved for Use in Patient Care Vicinities
U280-001-W2-HG is the first medical-grade USB wall charger
certified safe for patient care vicinities. This new solution is
currently the only USB charger on the market safe for use in all
areas of a hospital, clinic or other medical facility.
This USB charger is ideal for patient, guest or staff use. It
features one USB Type-A port with 2.5A of power for fast,
efficient charging of smartphones, tablets, MP3 players or USB
devices used in healthcare applications. It is compact and can
be installed in patient rooms, nursing stations and treatment
rooms, or sold in hospital gift shops for visitor and patient use.
UL 60601-1
Locking tab
mounts to outlet
wall plate (optional)
for compliance and
security
USB Type-A port
provides 2.5A of
charging power
U280-001-W2-HG
Medical-grade UPS systems provide medical-grade
regulatory compliance for connected equipment. All
models include built-in Faraday shielding that provides full
line isolation and reduces the cumulative leakage current
of connected equipment to less than 100 μA for optimal
safety in patient care vicinities. Full isolation also provides
continuous noise filtering and enhanced common mode
surge protection.
In addition to full isolation, medical-grade UPS systems
provide battery backup during blackouts, allowing
connected equipment to continue operating without
interruption. UPS systems also improve generator backup
by supporting equipment during the lag between power
outages and generator startup. UPS systems automatically
switch between utility power and battery backup in 2 to
5 ms, which is well within the fault tolerances of sensitive
computer equipment. Automatic voltage regulation
(AVR) keeps equipment working through voltage sags
(brownouts) or high voltages indefinitely, without draining
battery power. All models protect connected equipment
against damaging surges and disruptive EMI/RFI line
noise. SMART2500XLHG also provides pure sine wave
output from battery.
Models SMART700HGL, SMART1200XLHGL, SMX700HGL
and SMX1200XLHGL include a Lithium Iron Phosphate
(LiFePO
4
) battery with a 10,000-cycle life (20-30 times the
cycle life of traditional batteries) and a 5-year warranty.
Medical-Grade UPS Systems
UL/IEC 60601-1 and
UL 1778 Compliant
• Approved for Use in
Patient Care Vicinities
• Reduce Cumulative Shock Potential
to Less than 100 µA (Full Isolation)
• Lead Acid & Lithium Battery Technology
SMX1200XLHG UPS System (back)
SMART1200XLHG UPS System (back)
Model
Output
Capacity
Nominal AC
Voltage UL/IEC Compliance
Typical Backup Runtime
(Half/Full Load)
(1)
Hospital‑Grade
AC Outlets
Communication
Ports
(2)
AC Input
Cord Length
AC Input Plug
or Inlet
Medical‑Grade UPS Systems (For use inside and outside patient care vicinities.)
SMART2500XLHG
2,200VA/1,920W 120 V UL 60601-1 and 1778 13/4.4 min. + 4 (5-15/20R HG), 4 (C13) Serial, USB, EPO 6 ft.
(3)
5-20P/C20
(3)
SMART1200XLHG
1,000VA/750W 120 V UL 60601-1 and 1778 28/10 min. + 4 (5-15R HG) Serial and USB 6 ft. 5-15P HG
SMART1200XLHGL
(4)
1,000VA/750W 120 V UL 60601-1 and 1778 28/10 min. + 4 (5-15R HG) Serial and USB 6 ft. 5-15P HG
SMART700HG
700VA/450W 120 V UL 60601-1 and 1778 42/18 min. 4 (5-15R HG) Serial and USB 6 ft. 5-15P HG
SMART700HGL
(4)
700VA/450W 120 V UL 60601-1 and 1778 42/18 min. 4 (5-15R HG) Serial and USB 6 ft. 5-15P HG
OMNISMART350HG
330VA/225W 120 V UL 60601-1 and 1778 46/18 min. 4 (5-15R HG) Serial 6 ft. 5-15P HG
SMX1200XLHG
1,000VA/750W 230 V IEC 60601-1 27.5/11 min. + 6 (C13) Serial and USB 6 in. C14
(5)
SMX1200XLHGL
(4)
1,000VA/750W 230 V IEC 60601-1 28/10 min. + 6 (C13) Serial and USB 6 in. C14
(5)
SMX700HG
700VA/450W 230 V IEC 60601-1 36/14.5 min. 6 (C13) Serial and USB 6 in. C14
(5)
SMX700HGL
(4)
700VA/450W 230 V IEC 60601-1 42/18 min. 6 (C13) Serial and USB 6 in. C14
(5)
OMNIX350HG
350VA/225W 230 V IEC 60601-1 37/15.5 min. 6 (C13) USB 6 in. C14
(5)
Certifications vary by model. Go to www.tripplite.com for more information, including weights, dimensions and updates. (1) Backup runtimes vary with load, battery condition and other factors. Increase runtimes for “+” models by connecting
optional external battery packs. Refer to www.tripplite.com for compatible battery packs. (2) Serial ports are RS-232/DB9. USB and serial ports work with PowerAlert software (free download) or compatible third-party software. SMART2500XLHG
has an accessory slot that supports Tripp Lite’s optional network management card that provides a network interface for remote management via SNMP, Web, SSH or telnet. (3) Detachable 6 ft. AC input cord with 5-20P plug connects to C20 inlet
with locking clamp. (4) Includes Lithium Iron Phosphate (LiFePO4) battery with 20-30 times the cycle life of traditional batteries. (5) Connects to a user-supplied AC input cord and plug compatible with the facility’s wall outlets.
APPROVED FOR PATIENT CARE VICINITIES
Medical-Grade Power for Mobile Carts and Telemedicine
UL/IEC 60601-1 and
UL 1778 Compliant
• Approved for Use in
Patient Care Vicinities
• Reduce Cumulative Shock Potential
to Less than 100 µA (Full Isolation)
Mobile power retrofit kits provide the inverter/charger and controller in one mobile power solution. The user can upgrade new
or existing mobile medical carts for a fraction of the cost of buying new powered carts, providing medical-grade compliance for
connected equipment. They can also be used as telemedicine power systems.
The user-replaceable battery provides up to 12 hours of mobile power. When the power module is plugged into a wall outlet, it
quickly recharges the battery for faster cart rotation between shifts. Included PowerAlert
®
software prevents computer data loss
if battery power runs out before recharging. The retrofit kit is compatible with most popular carts by AFC, Anthro, Datalux, GCX,
Hergo, Jaco, Knurr, Stinger and others.
HCRK /
HCRK-54 / HCRK-36
Power Module
Add
AC Power
to Mobile
Medical
Carts
Model Nominal AC Voltage Wattage UL/IEC Compliance Battery Capacity Typical Runtime
(1)
AC Outlets Comm. Port AC Input Cord Length AC Input Inlet
Medical‑Grade Mobile Power Retrofit Kits (For use inside and outside patient care vicinities.)
HCRK
120 V 300W UL 60601-1 and 1778 90 Ah Up to 12 hours 3 (5-15R) USB 1 to 10 ft. (Coiled Cord) 5-15P HG
HCRK‑54
120 V 300W UL 60601-1 and 1778 54 Ah Up to 6 hours 3 (5-15R) USB 1 to 10 ft. (Coiled Cord) 5-15P HG
HCRK‑36
120 V 300W UL 60601-1 and 1778 36 Ah Up to 4 hours 3 (5-15R) USB 1 to 10 ft. (Coiled Cord) 5-15P HG
HCRK‑INT
230 V 300W IEC 60601-1 90 Ah Up to 12 hours 1 (C13) USB 8 in. C14
(2)
Certifications vary by model. Go to www.tripplite.com for more information, including weights, dimensions and updates. (1) Typical runtime between charges for common mobile medical cart applications. Runtimes vary with equipment
load, charge level, battery condition and other factors. (2) Connects to a user-supplied AC input cord and plug compatible with the facility’s wall outlets.
Medical-Grade Power Strips
UL 60601-1 and 60950-1
or 1363A Compliant
• Approved for Use in Patient Care Vicinities
• Reduce Shock Potential of
Connected Equipment
• Provide Power Distribution
• Include Hospital-Grade Plug and Outlets
• Antimicrobial Protection
Tripp Lite’s HGULTRA Series UL 60601-1 compliant power
strips provide safe, convenient AC power in a durable metal
housing, ideal for use anywhere outlets and space are limited.
Multiple hospital-grade outlets permit operation of additional
equipment in locations that do not have additional wall outlets
available, including inside patient care vicinities.
A patented protection circuit guards against shock hazards
by preventing power from reaching the unit’s outlets in the
presence of a fault. This protection circuit automatically resets
itself and restores power once the fault threat is gone. With a
switchless design that prevents accidental shutoff, built-in outlet
safety covers and a 6 ft. or 15 ft. power cord, HGULTRA Series
power strips are the perfect replacements for all non-compliant
power strips.
Tripp Lite’s OEM Series power strips are designed to be
permanently mounted to carts, IV poles, racks, tables, pedestals
and similar equipment in order to supply power to the plug-
connected components of movable medical equipment
assemblies. Equipped with long power cords and multiple
hospital-grade outlets, OEM-series power strips provide
versatile power distribution inside and outside patient care
vicinities.
To promote patient and staff safety, Tripp Lite’s medical-grade
power strips have a patented antimicrobial coating to help
reduce the risk of healthcare-acquired infections.
Model Nominal AC Voltage UL Compliance Surge Protection Rating Hospital‑Grade AC Outlets AC Input Cord Length AC Input Plug Type
Medical‑Grade Power Strips (For use inside and outside patient care vicinities.)
PS‑406‑HGULTRA
120 V UL 60601-1 and 60950-1 – 4 (5-15R HG)
(1)
6 ft. 5-15P HG
PS‑415‑HGULTRA
120 V UL 60601-1 and 60950-1 – 4 (5-15R HG)
(1)
15 ft. 5-15P HG
SPS415HGULTRA
120 V UL 60601-1 and 60950-1 1,410 joules 4 (5-15R HG)
(1)
15 ft. 5-15P HG
OEM‑Series Medical‑Grade Power Strips (For use inside and outside patient care vicinities. Must be permanently mounted inside patient care vicinities.)
PS‑607‑HG‑OEM
120 V UL 1363A – 6 (5-15R HG)
(1)
7 ft. 5-15P HG
PS‑615‑HG‑OEM
120 V UL 1363A – 6 (5-15R HG)
(1)
15 ft. 5-15P HG
PS‑415‑HG‑OEM
120 V UL 1363A – 4 (5-15R HG) 15 ft. 5-15P HG
PS‑410‑HGOEMCC
120 V UL 1363A – 4 (5-15R HG)
(2)
3 to 10 ft. (Coiled Cord) 5-15P HG
PS410HGOEMX
(3)
120 V UL 1363A – 4 (5-15R HG) 10 ft. 5-15P HG
Accessories (For use inside and outside patient care vicinities.)
HGOUTLETCVR
Pack of 4 reusable, self-locking HG outlet safety covers. Covers block outlet access and require a tool to remove, meeting code requirements.
PSHGCOVERKIT
Replacement duplex outlet covers for Tripp Lite medical-grade power strips and surge protectors. Includes 6 replacement covers and attachment hardware.
PSCLAMP
Power strip mounting clamp for IV poles, beds, carts, etc. Adjusts to fit diameters from 1 to 2.25 in. Includes cord manager and removable drip shield.
Certifications vary by model. Go to www.tripplite.com for more information, including weights, dimensions and updates. (1) Includes integrated safety covers. (2) Includes 4 reusable, self-locking HG outlet safety covers. (3) Includes built-in cord
manager and removable drip shield.
UL 60601-1,
1778
Certified
by:
UL 60601-1
UL 1778
PSHGCOVERKIT
Certified
by:
*
Regulates the use of electrical
and IT equipment in medical
environments.
UL 60601-1
UL 60950-1
*
UL 1363A
APPROVED FOR PATIENT CARE VICINITIES APPROVED FOR PATIENT CARE VICINITIES
PS-415-HG-OEM
PS-410-HGOEMCC
PS-415-HGULTRA
PSCLAMP
mounts strips safely,
securely and quickly.
New fast-mount
design!
PS-615-HG-OEM
HGOUTLETCVR
safety covers require a
tool to remove, meeting
code requirements.
IS1800HG Isolation Transformer (front and back)
IS1000HGDV Dual-Voltage Isolation Transformer (front)
Model Output Capacity Nominal AC Voltage UL/IEC Compliance Hospital‑Grade AC Outlets Cord Length AC Input Plug or Inlet
Medical‑Grade Isolation Transformers (For use inside and outside patient care vicinities.)
IS1800HG
1,800W 120V UL 60601-1 6 (5-15/20R HG) 10 ft. 5-20P HG
IS1800HGDV
1,800W 115/230V IEC 60601-1 8 (C13) – C20
(1)
IS1000HG
1,000W 120V UL 60601-1 4 (5-15R HG) 10 ft. 5-15P HG
IS1000HGDV
1,000W 115/230V IEC 60601-1 8 (C13) – C14
(1)
IS600HGDV
600W 115/230V IEC 60601-1 6 (C13) – C14
(1)
IS500HG
500W 120V UL 60601-1 4 (5-15R HG) 10 ft. 5-15P HG
IS300HGDV
300W 115/230V IEC 60601-1 4 (C13) – C14
(1)
IS250HG
250W 120V UL 60601-1 2 (5-15R HG) 10 ft. 5-15P HG
(1) Connects to a user-supplied AC input cord and plug compatible with the facility’s wall outlets.
Medical-Grade Isolation Transformers
UL/IEC 60601-1 Compliant
• Approved for Use in Patient Care Vicinities
• Reduce Cumulative Shock Potential
to Less than 100 µA (Full Isolation)
Medical-grade isolation transformers provide medical-grade regulatory
compliance for connected equipment and are ideal for equipment that does not
require battery backup. Faraday shielding provides full line isolation and reduces
the cumulative leakage current of connected equipment to less than 100 μA for
optimal safety in patient care vicinities, along with continuous noise filtering and
enhanced common mode surge protection.
Dual-voltage models support 115V or 230V at 50/60 Hz, selectable by input power
module fuse installation (both fuses are included with the unit as accessories).
Smaller toroid design provides low impedance line isolation, with pass through,
step up or step down capabilities.
Visit tripplite.com for our full selection,
including power strips rated to 20A.
Model AC Input Voltage AC Output Voltage UL/IEC Compliance AC Outlets Comm. Port AC Input Inlet
OEM Series Medical‑Grade Mobile Power Kits (For use as components by OEM manufacturers only.)
HC150SL
120V 120V UL 60601-1 and 1778 1 (C13) USB C14
(3)
HC350SNR
120V 120V UL 60601-1 and 1778 1 (C13) USB C14
(3)
HC150ATD
90-264V 120V UL 60601-1 and 1778 1 (C13) USB C14
(3)
HCINT150SL
230V 230V IEC 60601-1 1 (C13) USB C14
(3)
HCINT350SNR
230V 230V IEC 60601-1 and 62040-1 1 (C13) USB C14
(3)
(3) Connects to a user-supplied AC input cord and plug compatible with the facility’s wall outlets.
Patented
Patient-Protection
Technology
Medical-grade UPS systems provide medical-grade
regulatory compliance for connected equipment. All
models include built-in Faraday shielding that provides full
line isolation and reduces the cumulative leakage current
of connected equipment to less than 100 μA for optimal
safety in patient care vicinities. Full isolation also provides
continuous noise filtering and enhanced common mode
surge protection.
In addition to full isolation, medical-grade UPS systems
provide battery backup during blackouts, allowing
connected equipment to continue operating without
interruption. UPS systems also improve generator backup
by supporting equipment during the lag between power
outages and generator startup. UPS systems automatically
switch between utility power and battery backup in 2 to
5 ms, which is well within the fault tolerances of sensitive
computer equipment. Automatic voltage regulation
(AVR) keeps equipment working through voltage sags
(brownouts) or high voltages indefinitely, without draining
battery power. All models protect connected equipment
against damaging surges and disruptive EMI/RFI line
noise. SMART2500XLHG also provides pure sine wave
output from battery.
Models SMART700HGL, SMART1200XLHGL, SMX700HGL
and SMX1200XLHGL include a Lithium Iron Phosphate
(LiFePO
4
) battery with a 10,000-cycle life (20-30 times the
cycle life of traditional batteries) and a 5-year warranty.
Medical-Grade UPS Systems
UL/IEC 60601-1 and
UL 1778 Compliant
• Approved for Use in
Patient Care Vicinities
• Reduce Cumulative Shock Potential
to Less than 100 µA (Full Isolation)
• Lead Acid & Lithium Battery Technology
SMX1200XLHG UPS System (back)
SMART1200XLHG UPS System (back)
Model
Output
Capacity
Nominal AC
Voltage UL/IEC Compliance
Typical Backup Runtime
(Half/Full Load)
(1)
Hospital‑Grade
AC Outlets
Communication
Ports
(2)
AC Input
Cord Length
AC Input Plug
or Inlet
Medical‑Grade UPS Systems (For use inside and outside patient care vicinities.)
SMART2500XLHG
2,200VA/1,920W 120 V UL 60601-1 and 1778 13/4.4 min. + 4 (5-15/20R HG), 4 (C13) Serial, USB, EPO 6 ft.
(3)
5-20P/C20
(3)
SMART1200XLHG
1,000VA/750W 120 V UL 60601-1 and 1778 28/10 min. + 4 (5-15R HG) Serial and USB 6 ft. 5-15P HG
SMART1200XLHGL
(4)
1,000VA/750W 120 V UL 60601-1 and 1778 28/10 min. + 4 (5-15R HG) Serial and USB 6 ft. 5-15P HG
SMART700HG
700VA/450W 120 V UL 60601-1 and 1778 42/18 min. 4 (5-15R HG) Serial and USB 6 ft. 5-15P HG
SMART700HGL
(4)
700VA/450W 120 V UL 60601-1 and 1778 42/18 min. 4 (5-15R HG) Serial and USB 6 ft. 5-15P HG
OMNISMART350HG
330VA/225W 120 V UL 60601-1 and 1778 46/18 min. 4 (5-15R HG) Serial 6 ft. 5-15P HG
SMX1200XLHG
1,000VA/750W 230 V IEC 60601-1 27.5/11 min. + 6 (C13) Serial and USB 6 in. C14
(5)
SMX1200XLHGL
(4)
1,000VA/750W 230 V IEC 60601-1 28/10 min. + 6 (C13) Serial and USB 6 in. C14
(5)
SMX700HG
700VA/450W 230 V IEC 60601-1 36/14.5 min. 6 (C13) Serial and USB 6 in. C14
(5)
SMX700HGL
(4)
700VA/450W 230 V IEC 60601-1 42/18 min. 6 (C13) Serial and USB 6 in. C14
(5)
OMNIX350HG
350VA/225W 230 V IEC 60601-1 37/15.5 min. 6 (C13) USB 6 in. C14
(5)
Certifications vary by model. Go to www.tripplite.com for more information, including weights, dimensions and updates. (1) Backup runtimes vary with load, battery condition and other factors. Increase runtimes for “+” models by connecting
optional external battery packs. Refer to www.tripplite.com for compatible battery packs. (2) Serial ports are RS-232/DB9. USB and serial ports work with PowerAlert software (free download) or compatible third-party software. SMART2500XLHG
has an accessory slot that supports Tripp Lite’s optional network management card that provides a network interface for remote management via SNMP, Web, SSH or telnet. (3) Detachable 6 ft. AC input cord with 5-20P plug connects to C20 inlet
with locking clamp. (4) Includes Lithium Iron Phosphate (LiFePO4) battery with 20-30 times the cycle life of traditional batteries. (5) Connects to a user-supplied AC input cord and plug compatible with the facility’s wall outlets.
APPROVED FOR PATIENT CARE VICINITIES
Medical-Grade Power for Mobile Carts and Telemedicine
UL/IEC 60601-1 and
UL 1778 Compliant
• Approved for Use in
Patient Care Vicinities
• Reduce Cumulative Shock Potential
to Less than 100 µA (Full Isolation)
Mobile power retrofit kits provide the inverter/charger and controller in one mobile power solution. The user can upgrade new
or existing mobile medical carts for a fraction of the cost of buying new powered carts, providing medical-grade compliance for
connected equipment. They can also be used as telemedicine power systems.
The user-replaceable battery provides up to 12 hours of mobile power. When the power module is plugged into a wall outlet, it
quickly recharges the battery for faster cart rotation between shifts. Included PowerAlert
®
software prevents computer data loss
if battery power runs out before recharging. The retrofit kit is compatible with most popular carts by AFC, Anthro, Datalux, GCX,
Hergo, Jaco, Knurr, Stinger and others.
HCRK /
HCRK-54 / HCRK-36
Power Module
Add
AC Power
to Mobile
Medical
Carts
Model Nominal AC Voltage Wattage UL/IEC Compliance Battery Capacity Typical Runtime
(1)
AC Outlets Comm. Port AC Input Cord Length AC Input Inlet
Medical‑Grade Mobile Power Retrofit Kits (For use inside and outside patient care vicinities.)
HCRK
120 V 300W UL 60601-1 and 1778 90 Ah Up to 12 hours 3 (5-15R) USB 1 to 10 ft. (Coiled Cord) 5-15P HG
HCRK‑54
120 V 300W UL 60601-1 and 1778 54 Ah Up to 6 hours 3 (5-15R) USB 1 to 10 ft. (Coiled Cord) 5-15P HG
HCRK‑36
120 V 300W UL 60601-1 and 1778 36 Ah Up to 4 hours 3 (5-15R) USB 1 to 10 ft. (Coiled Cord) 5-15P HG
HCRK‑INT
230 V 300W IEC 60601-1 90 Ah Up to 12 hours 1 (C13) USB 8 in. C14
(2)
Certifications vary by model. Go to www.tripplite.com for more information, including weights, dimensions and updates. (1) Typical runtime between charges for common mobile medical cart applications. Runtimes vary with equipment
load, charge level, battery condition and other factors. (2) Connects to a user-supplied AC input cord and plug compatible with the facility’s wall outlets.
Medical-Grade Power Strips
UL 60601-1 and 60950-1
or 1363A Compliant
• Approved for Use in Patient Care Vicinities
• Reduce Shock Potential of
Connected Equipment
• Provide Power Distribution
• Include Hospital-Grade Plug and Outlets
• Antimicrobial Protection
Tripp Lite’s HGULTRA Series UL 60601-1 compliant power
strips provide safe, convenient AC power in a durable metal
housing, ideal for use anywhere outlets and space are limited.
Multiple hospital-grade outlets permit operation of additional
equipment in locations that do not have additional wall outlets
available, including inside patient care vicinities.
A patented protection circuit guards against shock hazards
by preventing power from reaching the unit’s outlets in the
presence of a fault. This protection circuit automatically resets
itself and restores power once the fault threat is gone. With a
switchless design that prevents accidental shutoff, built-in outlet
safety covers and a 6 ft. or 15 ft. power cord, HGULTRA Series
power strips are the perfect replacements for all non-compliant
power strips.
Tripp Lite’s OEM Series power strips are designed to be
permanently mounted to carts, IV poles, racks, tables, pedestals
and similar equipment in order to supply power to the plug-
connected components of movable medical equipment
assemblies. Equipped with long power cords and multiple
hospital-grade outlets, OEM-series power strips provide
versatile power distribution inside and outside patient care
vicinities.
To promote patient and staff safety, Tripp Lite’s medical-grade
power strips have a patented antimicrobial coating to help
reduce the risk of healthcare-acquired infections.
Model Nominal AC Voltage UL Compliance Surge Protection Rating Hospital‑Grade AC Outlets AC Input Cord Length AC Input Plug Type
Medical‑Grade Power Strips (For use inside and outside patient care vicinities.)
PS‑406‑HGULTRA
120 V UL 60601-1 and 60950-1 – 4 (5-15R HG)
(1)
6 ft. 5-15P HG
PS‑415‑HGULTRA
120 V UL 60601-1 and 60950-1 – 4 (5-15R HG)
(1)
15 ft. 5-15P HG
SPS415HGULTRA
120 V UL 60601-1 and 60950-1 1,410 joules 4 (5-15R HG)
(1)
15 ft. 5-15P HG
OEM‑Series Medical‑Grade Power Strips (For use inside and outside patient care vicinities. Must be permanently mounted inside patient care vicinities.)
PS‑607‑HG‑OEM
120 V UL 1363A – 6 (5-15R HG)
(1)
7 ft. 5-15P HG
PS‑615‑HG‑OEM
120 V UL 1363A – 6 (5-15R HG)
(1)
15 ft. 5-15P HG
PS‑415‑HG‑OEM
120 V UL 1363A – 4 (5-15R HG) 15 ft. 5-15P HG
PS‑410‑HGOEMCC
120 V UL 1363A – 4 (5-15R HG)
(2)
3 to 10 ft. (Coiled Cord) 5-15P HG
PS410HGOEMX
(3)
120 V UL 1363A – 4 (5-15R HG) 10 ft. 5-15P HG
Accessories (For use inside and outside patient care vicinities.)
HGOUTLETCVR
Pack of 4 reusable, self-locking HG outlet safety covers. Covers block outlet access and require a tool to remove, meeting code requirements.
PSHGCOVERKIT
Replacement duplex outlet covers for Tripp Lite medical-grade power strips and surge protectors. Includes 6 replacement covers and attachment hardware.
PSCLAMP
Power strip mounting clamp for IV poles, beds, carts, etc. Adjusts to fit diameters from 1 to 2.25 in. Includes cord manager and removable drip shield.
Certifications vary by model. Go to www.tripplite.com for more information, including weights, dimensions and updates. (1) Includes integrated safety covers. (2) Includes 4 reusable, self-locking HG outlet safety covers. (3) Includes built-in cord
manager and removable drip shield.
UL 60601-1,
1778
Certified
by:
UL 60601-1
UL 1778
PSHGCOVERKIT
Certified
by:
*
Regulates the use of electrical
and IT equipment in medical
environments.
UL 60601-1
UL 60950-1
*
UL 1363A
APPROVED FOR PATIENT CARE VICINITIES APPROVED FOR PATIENT CARE VICINITIES
PS-415-HG-OEM
PS-410-HGOEMCC
PS-415-HGULTRA
PSCLAMP
mounts strips safely,
securely and quickly.
New fast-mount
design!
PS-615-HG-OEM
HGOUTLETCVR
safety covers require a
tool to remove, meeting
code requirements.
IS1800HG Isolation Transformer (front and back)
IS1000HGDV Dual-Voltage Isolation Transformer (front)
Model Output Capacity Nominal AC Voltage UL/IEC Compliance Hospital‑Grade AC Outlets Cord Length AC Input Plug or Inlet
Medical‑Grade Isolation Transformers (For use inside and outside patient care vicinities.)
IS1800HG
1,800W 120V UL 60601-1 6 (5-15/20R HG) 10 ft. 5-20P HG
IS1800HGDV
1,800W 115/230V IEC 60601-1 8 (C13) – C20
(1)
IS1000HG
1,000W 120V UL 60601-1 4 (5-15R HG) 10 ft. 5-15P HG
IS1000HGDV
1,000W 115/230V IEC 60601-1 8 (C13) – C14
(1)
IS600HGDV
600W 115/230V IEC 60601-1 6 (C13) – C14
(1)
IS500HG
500W 120V UL 60601-1 4 (5-15R HG) 10 ft. 5-15P HG
IS300HGDV
300W 115/230V IEC 60601-1 4 (C13) – C14
(1)
IS250HG
250W 120V UL 60601-1 2 (5-15R HG) 10 ft. 5-15P HG
(1) Connects to a user-supplied AC input cord and plug compatible with the facility’s wall outlets.
Medical-Grade Isolation Transformers
UL/IEC 60601-1 Compliant
• Approved for Use in Patient Care Vicinities
• Reduce Cumulative Shock Potential
to Less than 100 µA (Full Isolation)
Medical-grade isolation transformers provide medical-grade regulatory
compliance for connected equipment and are ideal for equipment that does not
require battery backup. Faraday shielding provides full line isolation and reduces
the cumulative leakage current of connected equipment to less than 100 μA for
optimal safety in patient care vicinities, along with continuous noise filtering and
enhanced common mode surge protection.
Dual-voltage models support 115V or 230V at 50/60 Hz, selectable by input power
module fuse installation (both fuses are included with the unit as accessories).
Smaller toroid design provides low impedance line isolation, with pass through,
step up or step down capabilities.
Visit tripplite.com for our full selection,
including power strips rated to 20A.
Model AC Input Voltage AC Output Voltage UL/IEC Compliance AC Outlets Comm. Port AC Input Inlet
OEM Series Medical‑Grade Mobile Power Kits (For use as components by OEM manufacturers only.)
HC150SL
120V 120V UL 60601-1 and 1778 1 (C13) USB C14
(3)
HC350SNR
120V 120V UL 60601-1 and 1778 1 (C13) USB C14
(3)
HC150ATD
90-264V 120V UL 60601-1 and 1778 1 (C13) USB C14
(3)
HCINT150SL
230V 230V IEC 60601-1 1 (C13) USB C14
(3)
HCINT350SNR
230V 230V IEC 60601-1 and 62040-1 1 (C13) USB C14
(3)
(3) Connects to a user-supplied AC input cord and plug compatible with the facility’s wall outlets.
Patented
Patient-Protection
Technology
Medical-grade UPS systems provide medical-grade
regulatory compliance for connected equipment. All
models include built-in Faraday shielding that provides full
line isolation and reduces the cumulative leakage current
of connected equipment to less than 100 μA for optimal
safety in patient care vicinities. Full isolation also provides
continuous noise filtering and enhanced common mode
surge protection.
In addition to full isolation, medical-grade UPS systems
provide battery backup during blackouts, allowing
connected equipment to continue operating without
interruption. UPS systems also improve generator backup
by supporting equipment during the lag between power
outages and generator startup. UPS systems automatically
switch between utility power and battery backup in 2 to
5 ms, which is well within the fault tolerances of sensitive
computer equipment. Automatic voltage regulation
(AVR) keeps equipment working through voltage sags
(brownouts) or high voltages indefinitely, without draining
battery power. All models protect connected equipment
against damaging surges and disruptive EMI/RFI line
noise. SMART2500XLHG also provides pure sine wave
output from battery.
Models SMART700HGL, SMART1200XLHGL, SMX700HGL
and SMX1200XLHGL include a Lithium Iron Phosphate
(LiFePO
4
) battery with a 10,000-cycle life (20-30 times the
cycle life of traditional batteries) and a 5-year warranty.
Medical-Grade UPS Systems
UL/IEC 60601-1 and
UL 1778 Compliant
• Approved for Use in
Patient Care Vicinities
• Reduce Cumulative Shock Potential
to Less than 100 µA (Full Isolation)
• Lead Acid & Lithium Battery Technology
SMX1200XLHG UPS System (back)
SMART1200XLHG UPS System (back)
Model
Output
Capacity
Nominal AC
Voltage UL/IEC Compliance
Typical Backup Runtime
(Half/Full Load)
(1)
Hospital‑Grade
AC Outlets
Communication
Ports
(2)
AC Input
Cord Length
AC Input Plug
or Inlet
Medical‑Grade UPS Systems (For use inside and outside patient care vicinities.)
SMART2500XLHG
2,200VA/1,920W 120 V UL 60601-1 and 1778 13/4.4 min. + 4 (5-15/20R HG), 4 (C13) Serial, USB, EPO 6 ft.
(3)
5-20P/C20
(3)
SMART1200XLHG
1,000VA/750W 120 V UL 60601-1 and 1778 28/10 min. + 4 (5-15R HG) Serial and USB 6 ft. 5-15P HG
SMART1200XLHGL
(4)
1,000VA/750W 120 V UL 60601-1 and 1778 28/10 min. + 4 (5-15R HG) Serial and USB 6 ft. 5-15P HG
SMART700HG
700VA/450W 120 V UL 60601-1 and 1778 42/18 min. 4 (5-15R HG) Serial and USB 6 ft. 5-15P HG
SMART700HGL
(4)
700VA/450W 120 V UL 60601-1 and 1778 42/18 min. 4 (5-15R HG) Serial and USB 6 ft. 5-15P HG
OMNISMART350HG
330VA/225W 120 V UL 60601-1 and 1778 46/18 min. 4 (5-15R HG) Serial 6 ft. 5-15P HG
SMX1200XLHG
1,000VA/750W 230 V IEC 60601-1 27.5/11 min. + 6 (C13) Serial and USB 6 in. C14
(5)
SMX1200XLHGL
(4)
1,000VA/750W 230 V IEC 60601-1 28/10 min. + 6 (C13) Serial and USB 6 in. C14
(5)
SMX700HG
700VA/450W 230 V IEC 60601-1 36/14.5 min. 6 (C13) Serial and USB 6 in. C14
(5)
SMX700HGL
(4)
700VA/450W 230 V IEC 60601-1 42/18 min. 6 (C13) Serial and USB 6 in. C14
(5)
OMNIX350HG
350VA/225W 230 V IEC 60601-1 37/15.5 min. 6 (C13) USB 6 in. C14
(5)
Certifications vary by model. Go to www.tripplite.com for more information, including weights, dimensions and updates. (1) Backup runtimes vary with load, battery condition and other factors. Increase runtimes for “+” models by connecting
optional external battery packs. Refer to www.tripplite.com for compatible battery packs. (2) Serial ports are RS-232/DB9. USB and serial ports work with PowerAlert software (free download) or compatible third-party software. SMART2500XLHG
has an accessory slot that supports Tripp Lite’s optional network management card that provides a network interface for remote management via SNMP, Web, SSH or telnet. (3) Detachable 6 ft. AC input cord with 5-20P plug connects to C20 inlet
with locking clamp. (4) Includes Lithium Iron Phosphate (LiFePO4) battery with 20-30 times the cycle life of traditional batteries. (5) Connects to a user-supplied AC input cord and plug compatible with the facility’s wall outlets.
APPROVED FOR PATIENT CARE VICINITIES
Medical-Grade Power for Mobile Carts and Telemedicine
UL/IEC 60601-1 and
UL 1778 Compliant
• Approved for Use in
Patient Care Vicinities
• Reduce Cumulative Shock Potential
to Less than 100 µA (Full Isolation)
Mobile power retrofit kits provide the inverter/charger and controller in one mobile power solution. The user can upgrade new
or existing mobile medical carts for a fraction of the cost of buying new powered carts, providing medical-grade compliance for
connected equipment. They can also be used as telemedicine power systems.
The user-replaceable battery provides up to 12 hours of mobile power. When the power module is plugged into a wall outlet, it
quickly recharges the battery for faster cart rotation between shifts. Included PowerAlert
®
software prevents computer data loss
if battery power runs out before recharging. The retrofit kit is compatible with most popular carts by AFC, Anthro, Datalux, GCX,
Hergo, Jaco, Knurr, Stinger and others.
HCRK /
HCRK-54 / HCRK-36
Power Module
Add
AC Power
to Mobile
Medical
Carts
Model Nominal AC Voltage Wattage UL/IEC Compliance Battery Capacity Typical Runtime
(1)
AC Outlets Comm. Port AC Input Cord Length AC Input Inlet
Medical‑Grade Mobile Power Retrofit Kits (For use inside and outside patient care vicinities.)
HCRK
120 V 300W UL 60601-1 and 1778 90 Ah Up to 12 hours 3 (5-15R) USB 1 to 10 ft. (Coiled Cord) 5-15P HG
HCRK‑54
120 V 300W UL 60601-1 and 1778 54 Ah Up to 6 hours 3 (5-15R) USB 1 to 10 ft. (Coiled Cord) 5-15P HG
HCRK‑36
120 V 300W UL 60601-1 and 1778 36 Ah Up to 4 hours 3 (5-15R) USB 1 to 10 ft. (Coiled Cord) 5-15P HG
HCRK‑INT
230 V 300W IEC 60601-1 90 Ah Up to 12 hours 1 (C13) USB 8 in. C14
(2)
Certifications vary by model. Go to www.tripplite.com for more information, including weights, dimensions and updates. (1) Typical runtime between charges for common mobile medical cart applications. Runtimes vary with equipment
load, charge level, battery condition and other factors. (2) Connects to a user-supplied AC input cord and plug compatible with the facility’s wall outlets.
Medical-Grade Power Strips
UL 60601-1 and 60950-1
or 1363A Compliant
• Approved for Use in Patient Care Vicinities
• Reduce Shock Potential of
Connected Equipment
• Provide Power Distribution
• Include Hospital-Grade Plug and Outlets
• Antimicrobial Protection
Tripp Lite’s HGULTRA Series UL 60601-1 compliant power
strips provide safe, convenient AC power in a durable metal
housing, ideal for use anywhere outlets and space are limited.
Multiple hospital-grade outlets permit operation of additional
equipment in locations that do not have additional wall outlets
available, including inside patient care vicinities.
A patented protection circuit guards against shock hazards
by preventing power from reaching the unit’s outlets in the
presence of a fault. This protection circuit automatically resets
itself and restores power once the fault threat is gone. With a
switchless design that prevents accidental shutoff, built-in outlet
safety covers and a 6 ft. or 15 ft. power cord, HGULTRA Series
power strips are the perfect replacements for all non-compliant
power strips.
Tripp Lite’s OEM Series power strips are designed to be
permanently mounted to carts, IV poles, racks, tables, pedestals
and similar equipment in order to supply power to the plug-
connected components of movable medical equipment
assemblies. Equipped with long power cords and multiple
hospital-grade outlets, OEM-series power strips provide
versatile power distribution inside and outside patient care
vicinities.
To promote patient and staff safety, Tripp Lite’s medical-grade
power strips have a patented antimicrobial coating to help
reduce the risk of healthcare-acquired infections.
Model Nominal AC Voltage UL Compliance Surge Protection Rating Hospital‑Grade AC Outlets AC Input Cord Length AC Input Plug Type
Medical‑Grade Power Strips (For use inside and outside patient care vicinities.)
PS‑406‑HGULTRA
120 V UL 60601-1 and 60950-1 – 4 (5-15R HG)
(1)
6 ft. 5-15P HG
PS‑415‑HGULTRA
120 V UL 60601-1 and 60950-1 – 4 (5-15R HG)
(1)
15 ft. 5-15P HG
SPS415HGULTRA
120 V UL 60601-1 and 60950-1 1,410 joules 4 (5-15R HG)
(1)
15 ft. 5-15P HG
OEM‑Series Medical‑Grade Power Strips (For use inside and outside patient care vicinities. Must be permanently mounted inside patient care vicinities.)
PS‑607‑HG‑OEM
120 V UL 1363A – 6 (5-15R HG)
(1)
7 ft. 5-15P HG
PS‑615‑HG‑OEM
120 V UL 1363A – 6 (5-15R HG)
(1)
15 ft. 5-15P HG
PS‑415‑HG‑OEM
120 V UL 1363A – 4 (5-15R HG) 15 ft. 5-15P HG
PS‑410‑HGOEMCC
120 V UL 1363A – 4 (5-15R HG)
(2)
3 to 10 ft. (Coiled Cord) 5-15P HG
PS410HGOEMX
(3)
120 V UL 1363A – 4 (5-15R HG) 10 ft. 5-15P HG
Accessories (For use inside and outside patient care vicinities.)
HGOUTLETCVR
Pack of 4 reusable, self-locking HG outlet safety covers. Covers block outlet access and require a tool to remove, meeting code requirements.
PSHGCOVERKIT
Replacement duplex outlet covers for Tripp Lite medical-grade power strips and surge protectors. Includes 6 replacement covers and attachment hardware.
PSCLAMP
Power strip mounting clamp for IV poles, beds, carts, etc. Adjusts to fit diameters from 1 to 2.25 in. Includes cord manager and removable drip shield.
Certifications vary by model. Go to www.tripplite.com for more information, including weights, dimensions and updates. (1) Includes integrated safety covers. (2) Includes 4 reusable, self-locking HG outlet safety covers. (3) Includes built-in cord
manager and removable drip shield.
UL 60601-1,
1778
Certified
by:
UL 60601-1
UL 1778
PSHGCOVERKIT
Certified
by:
*
Regulates the use of electrical
and IT equipment in medical
environments.
UL 60601-1
UL 60950-1
*
UL 1363A
APPROVED FOR PATIENT CARE VICINITIES APPROVED FOR PATIENT CARE VICINITIES
PS-415-HG-OEM
PS-410-HGOEMCC
PS-415-HGULTRA
PSCLAMP
mounts strips safely,
securely and quickly.
New fast-mount
design!
PS-615-HG-OEM
HGOUTLETCVR
safety covers require a
tool to remove, meeting
code requirements.
IS1800HG Isolation Transformer (front and back)
IS1000HGDV Dual-Voltage Isolation Transformer (front)
Model Output Capacity Nominal AC Voltage UL/IEC Compliance Hospital‑Grade AC Outlets Cord Length AC Input Plug or Inlet
Medical‑Grade Isolation Transformers (For use inside and outside patient care vicinities.)
IS1800HG
1,800W 120V UL 60601-1 6 (5-15/20R HG) 10 ft. 5-20P HG
IS1800HGDV
1,800W 115/230V IEC 60601-1 8 (C13) – C20
(1)
IS1000HG
1,000W 120V UL 60601-1 4 (5-15R HG) 10 ft. 5-15P HG
IS1000HGDV
1,000W 115/230V IEC 60601-1 8 (C13) – C14
(1)
IS600HGDV
600W 115/230V IEC 60601-1 6 (C13) – C14
(1)
IS500HG
500W 120V UL 60601-1 4 (5-15R HG) 10 ft. 5-15P HG
IS300HGDV
300W 115/230V IEC 60601-1 4 (C13) – C14
(1)
IS250HG
250W 120V UL 60601-1 2 (5-15R HG) 10 ft. 5-15P HG
(1) Connects to a user-supplied AC input cord and plug compatible with the facility’s wall outlets.
Medical-Grade Isolation Transformers
UL/IEC 60601-1 Compliant
• Approved for Use in Patient Care Vicinities
• Reduce Cumulative Shock Potential
to Less than 100 µA (Full Isolation)
Medical-grade isolation transformers provide medical-grade regulatory
compliance for connected equipment and are ideal for equipment that does not
require battery backup. Faraday shielding provides full line isolation and reduces
the cumulative leakage current of connected equipment to less than 100 μA for
optimal safety in patient care vicinities, along with continuous noise filtering and
enhanced common mode surge protection.
Dual-voltage models support 115V or 230V at 50/60 Hz, selectable by input power
module fuse installation (both fuses are included with the unit as accessories).
Smaller toroid design provides low impedance line isolation, with pass through,
step up or step down capabilities.
Visit tripplite.com for our full selection,
including power strips rated to 20A.
Model AC Input Voltage AC Output Voltage UL/IEC Compliance AC Outlets Comm. Port AC Input Inlet
OEM Series Medical‑Grade Mobile Power Kits (For use as components by OEM manufacturers only.)
HC150SL
120V 120V UL 60601-1 and 1778 1 (C13) USB C14
(3)
HC350SNR
120V 120V UL 60601-1 and 1778 1 (C13) USB C14
(3)
HC150ATD
90-264V 120V UL 60601-1 and 1778 1 (C13) USB C14
(3)
HCINT150SL
230V 230V IEC 60601-1 1 (C13) USB C14
(3)
HCINT350SNR
230V 230V IEC 60601-1 and 62040-1 1 (C13) USB C14
(3)
(3) Connects to a user-supplied AC input cord and plug compatible with the facility’s wall outlets.
Patented
Patient-Protection
Technology
1111 W. 35th Street, Chicago, IL 60609 USA
773.869.1282 • [email protected]
www.tripplite.com
18-03-366 95-34CC
Copyright © 2018 Tripp Lite. All trademarks are the sole property of their respective owners. Photos and illustrations
may differ slightly from actual products. Tripp Lite has a policy of continuous improvement. Specifications are subject
to change without notice. Life-Support Statement:
Tripp Lite does not recommend the use of any of its products in
any life-support application in which a malfunction or failure of a Tripp Lite product could cause failure or significantly
alter the performance of a life-support device.
Tripp Lite’s medical-grade solutions ensure regulatory compliance throughout
healthcare facilities – both inside and outside patient care vicinities!
Why is compliance with medical-grade
standards so important?
Patient safety depends on it! UL 60601-1 and UL 1363A are safety standards
required for all electrical devices that could potentially come into contact
with patients or staff in patient care vicinities – an enormous category that
encompasses everything from lamps and televisions to computers and
diagnostic equipment. Just having a hospital-grade plug isn’t enough to
achieve medical-grade compliance. Medical-grade UPS systems, power
strips and surge protectors, mobile power solutions, isolation transformers
and USB chargers combine hospital-grade plugs and outlets with special
shock-prevention measures to achieve full medical-grade compliance.
How can Tripp Lite help you achieve
medical-grade compliance?
Tripp Lite’s medical-grade UPS systems, power strips and surge protectors,
mobile power solutions, isolation transformers and USB chargers provide
UL 60601-1 or UL 1363A compliance, including medical, diagnostic-imaging,
pharmaceutical, lab and EMS equipment, mobile cart and telemedical
equipment, computer/information systems equipment and telecom/security
equipment. Tripp Lite offers the broadest range of medical-grade power
protection and power supply solutions available.
Tampa General Hospital
The Goal
Ken Lange, Senior Electrical Engineer for
Tampa General Hospital, was managing
a project to put computer stations (a
computer and a monitor) next to 200
patient beds. However, the combined
cumulative leakage of each computer
station was too high. Lange needed to
ensure that the stations were connected
to highly reliable power sources that were
UL 60601-1 compliant (reducing leakage
current below 100 microamps). Ultimately,
the stations’ compliance would be
verified by the authority that monitors
compliance in Tampa General Hospital’s
area – the Florida Agency for Health Care
Administration (AHCA).
The Solution
Lange turned to Tripp Lite’s medical-
grade isolation transformers to power
his computer stations. The isolation
transformers not only reduced leakage
current and ensured UL 60601-1, NEC
and AHCA compliance, they also satisfied
several other needs. The isolation
transformers protected the computers from
potential damage and disruption caused by
transient surges and line noise. Additionally,
their compact, durable all-metal cabinet
(and the use of a wall-mount bracket)
allowed Lange to reduce the profile of his
equipment and conserve valuable floor
space within patient rooms.
TRIPP LITE MEDICAL-GRADE COMPLIANCE SUCCESS STORY
Distributed By:
Go to www.tripplite.com, email [email protected] or call 773.869.1282 for more information.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
HEALTHCARE / MEDICAL SOLUTIONS
Healthcare/Medical Solutions
for Patient Care Vicinities
Tripp Lite manufactures power protection, power supply and
regulatory compliance solutions for use in hospitals and other
healthcare facilities worldwide. Medical-grade UPS systems,
power strips and surge protectors, mobile power solutions,
isolation transformers and USB chargers support a wide range
of equipment and applications both inside and outside patient
care vicinities.
• 120 V and 230 V Solutions
• Regulatory Compliance / Patient Safety Solutions
(UL/IEC 60601-1, UL 1363A and More)
• OEM Integration
APPROVED FOR PATIENT CARE VICINITIES MEDICAL‑GRADE COMPLIANCE
Tripp Lite Helps You Achieve Medical-Grade Compliance
(UL 60601-1 or UL 1363A)
Regulatory Compliance Quick Reference
Standard Description Application
UL 60601-1 Shock-prevention measure required for all
devices that can potentially come in contact
with patients and staff.
Patient care
vicinities
UL 1363A Basic safety standard for power strips
integrated as components of a larger system
where they supply power to equipment in a
movable assembly that is rack, table or
pedestal-mounted.
Mobile applications
inside and outside
patient care
vicinities
UL 1363 Basic safety standard for power strips that
stand alone and are NOT designed as
components of a larger system.
Lab applications
and administrative
areas
UL 1449 Surge protector safety standard for units used
outside of patient care vicinities.
Administrative
areas and business
offices
Tripp Lite provides regulated power, battery backup and regulatory code compliance
to support a wide range of healthcare applications.
Clinical Lab Equipment Mobile Power / Telemedicine Healthcare IT Equipment
Ophthalmology Equipment Diagnostic Imaging Systems Medical Equipment
Model AC Input Charging Output UL Compliance Charging Port
U280‑001‑W2‑HG
120V, 50/60 Hz 2.5A / 13W UL 60601-1 1 USB Type-A
The First USB Wall Charger Certified for Patient Care Vicinities
UL 60601-1 Compliant
• Approved for Use in Patient Care Vicinities
U280-001-W2-HG is the first medical-grade USB wall charger
certified safe for patient care vicinities. This new solution is
currently the only USB charger on the market safe for use in all
areas of a hospital, clinic or other medical facility.
This USB charger is ideal for patient, guest or staff use. It
features one USB Type-A port with 2.5A of power for fast,
efficient charging of smartphones, tablets, MP3 players or USB
devices used in healthcare applications. It is compact and can
be installed in patient rooms, nursing stations and treatment
rooms, or sold in hospital gift shops for visitor and patient use.
UL 60601-1
Locking tab
mounts to outlet
wall plate (optional)
for compliance and
security
USB Type-A port
provides 2.5A of
charging power
U280-001-W2-HG
1111 W. 35th Street, Chicago, IL 60609 USA
773.869.1282 • [email protected]
www.tripplite.com
18-03-366 95-34CC
Copyright © 2018 Tripp Lite. All trademarks are the sole property of their respective owners. Photos and illustrations
may differ slightly from actual products. Tripp Lite has a policy of continuous improvement. Specifications are subject
to change without notice. Life-Support Statement:
Tripp Lite does not recommend the use of any of its products in
any life-support application in which a malfunction or failure of a Tripp Lite product could cause failure or significantly
alter the performance of a life-support device.
Tripp Lite’s medical-grade solutions ensure regulatory compliance throughout
healthcare facilities – both inside and outside patient care vicinities!
Why is compliance with medical-grade
standards so important?
Patient safety depends on it! UL 60601-1 and UL 1363A are safety standards
required for all electrical devices that could potentially come into contact
with patients or staff in patient care vicinities – an enormous category that
encompasses everything from lamps and televisions to computers and
diagnostic equipment. Just having a hospital-grade plug isn’t enough to
achieve medical-grade compliance. Medical-grade UPS systems, power
strips and surge protectors, mobile power solutions, isolation transformers
and USB chargers combine hospital-grade plugs and outlets with special
shock-prevention measures to achieve full medical-grade compliance.
How can Tripp Lite help you achieve
medical-grade compliance?
Tripp Lite’s medical-grade UPS systems, power strips and surge protectors,
mobile power solutions, isolation transformers and USB chargers provide
UL 60601-1 or UL 1363A compliance, including medical, diagnostic-imaging,
pharmaceutical, lab and EMS equipment, mobile cart and telemedical
equipment, computer/information systems equipment and telecom/security
equipment. Tripp Lite offers the broadest range of medical-grade power
protection and power supply solutions available.
Tampa General Hospital
The Goal
Ken Lange, Senior Electrical Engineer for
Tampa General Hospital, was managing
a project to put computer stations (a
computer and a monitor) next to 200
patient beds. However, the combined
cumulative leakage of each computer
station was too high. Lange needed to
ensure that the stations were connected
to highly reliable power sources that were
UL 60601-1 compliant (reducing leakage
current below 100 microamps). Ultimately,
the stations’ compliance would be
verified by the authority that monitors
compliance in Tampa General Hospital’s
area – the Florida Agency for Health Care
Administration (AHCA).
The Solution
Lange turned to Tripp Lite’s medical-
grade isolation transformers to power
his computer stations. The isolation
transformers not only reduced leakage
current and ensured UL 60601-1, NEC
and AHCA compliance, they also satisfied
several other needs. The isolation
transformers protected the computers from
potential damage and disruption caused by
transient surges and line noise. Additionally,
their compact, durable all-metal cabinet
(and the use of a wall-mount bracket)
allowed Lange to reduce the profile of his
equipment and conserve valuable floor
space within patient rooms.
TRIPP LITE MEDICAL-GRADE COMPLIANCE SUCCESS STORY
Distributed By:
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
Isolation Transformers and USB Chargers. Medical-Grade UPS Systems, Power Strips and
Surge Protectors, Mobile Power Solutions, Isolation Transformers and USB Chargers.
Medical-Grade UPS Systems, Power Strips and Surge Protectors, Mobile Power Solutions,
HEALTHCARE / MEDICAL SOLUTIONS
Healthcare/Medical Solutions
for Patient Care Vicinities
Tripp Lite manufactures power protection, power supply and
regulatory compliance solutions for use in hospitals and other
healthcare facilities worldwide. Medical-grade UPS systems,
power strips and surge protectors, mobile power solutions,
isolation transformers and USB chargers support a wide range
of equipment and applications both inside and outside patient
care vicinities.
• 120 V and 230 V Solutions
• Regulatory Compliance / Patient Safety Solutions
(UL/IEC 60601-1, UL 1363A and More)
• OEM Integration
APPROVED FOR PATIENT CARE VICINITIES MEDICAL‑GRADE COMPLIANCE
Tripp Lite Helps You Achieve Medical-Grade Compliance
(UL 60601-1 or UL 1363A)
Regulatory Compliance Quick Reference
Standard Description Application
UL 60601-1 Shock-prevention measure required for all
devices that can potentially come in contact
with patients and staff.
Patient care
vicinities
UL 1363A Basic safety standard for power strips
integrated as components of a larger system
where they supply power to equipment in a
movable assembly that is rack, table or
pedestal-mounted.
Mobile applications
inside and outside
patient care
vicinities
UL 1363 Basic safety standard for power strips that
stand alone and are NOT designed as
components of a larger system.
Lab applications
and administrative
areas
UL 1449 Surge protector safety standard for units used
outside of patient care vicinities.
Administrative
areas and business
offices
Tripp Lite provides regulated power, battery backup and regulatory code compliance
to support a wide range of healthcare applications.
Clinical Lab Equipment Mobile Power / Telemedicine Healthcare IT Equipment
Ophthalmology Equipment Diagnostic Imaging Systems Medical Equipment
Model AC Input Charging Output UL Compliance Charging Port
U280‑001‑W2‑HG
120V, 50/60 Hz 2.5A / 13W UL 60601-1 1 USB Type-A
The First USB Wall Charger Certified for Patient Care Vicinities
UL 60601-1 Compliant
• Approved for Use in Patient Care Vicinities
U280-001-W2-HG is the first medical-grade USB wall charger
certified safe for patient care vicinities. This new solution is
currently the only USB charger on the market safe for use in all
areas of a hospital, clinic or other medical facility.
This USB charger is ideal for patient, guest or staff use. It
features one USB Type-A port with 2.5A of power for fast,
efficient charging of smartphones, tablets, MP3 players or USB
devices used in healthcare applications. It is compact and can
be installed in patient rooms, nursing stations and treatment
rooms, or sold in hospital gift shops for visitor and patient use.
UL 60601-1
Locking tab
mounts to outlet
wall plate (optional)
for compliance and
security
USB Type-A port
provides 2.5A of
charging power
U280-001-W2-HG
