Loading ...
Loading ...
Loading ...
Other issues
Use these procedures to resolve other issues that may occur in relation to the product.
The problem Try this!
The Projector is hot.
Watching Projector for an extended period of time causes the panel to generate
heat.
The heat from the panel is dissipated through internal vents running along the
top of the Projector.
The bottom, however, may feel hot to the touch after extended use.
Children watching Projector need constant adult supervision to prevent them
from touching the Projector.
This heat, however, is not a defect and does not affect the Projector's
functionality.
The Projector smells like plastic. This smell is normal and will dissipate over time.
The settings are lost after 5 minutes or
every time the Projector is turned off.
If Usage Mode is set to Retail Mode, the Projector's audio and video settings are
automatically reset every 5 minutes.
Change Usage Mode to Home Mode.
• Settings General System Manager Usage Mode
The Projector is tilted to the side. Remove the base stand from the Projector and reassemble it.
The stand is wobbly or crooked.
Refer to the Quick Setup Guide and make sure that the stand is assembled
correctly.
A POP (Projector’s internal banner ad)
appears on the screen.
Change Usage Mode to Home Mode.
•
Settings General System Manager Usage Mode
The Projector is making a popping noise.
The expansion and contraction of the Projector's outer casing may cause a
popping noise.
This does not indicate a product malfunction.
The Projector is safe to use.
- 137 -
Loading ...
Loading ...
Loading ...