Loading ...
Loading ...
Loading ...
Specifications
DS O5000 Series Digital Storage Oscilloscope User Manual
62
Chapter
Chapter
Chapter
Chapter 8
8
8
8 Specifications
Specifications
Specifications
Specifications
8.1
8.1
8.1
8.1 Technical
Technical
Technical
Technical Specifications
Specifications
Specifications
Specifications
All specifications herein mentioned apply to the DSO5000 series oscilloscopes . Before checking
an oscilloscope from HANTEK to see if it complie s with these specifications, make sure it meet s
the following conditions:
The oscilloscope must have been operating continuously for twenty minutes under the
specified operating temperature.
T he Do Self Cal operation must be performed through the Utility menu if the operating
temperature changes by more than 5 ℃ .
The oscilloscope must be within the factory calibration interval .
All specifications are guaranteed unless noted ‘ typical ’ .
Oscilloscope
Oscilloscope
Oscilloscope
Oscilloscope Specifications
Specifications
Specifications
Specifications
Horizontal
Horizontal
Horizontal
Horizontal
Sample Rate Range 50 0MS/s--1GS/s
Waveform Interpolation ( sin x ) /x
Record Length
Maximum 1M samples per s ingle - channel; m aximum 512K
samples per d ual-channel (4K,16K,40K optional)
SEC/DIV Range
DS O5 062 N
DS O5 102 N
DS O5 102 M
DS O5 202 M
4 ns/ div to 4 0s/ div, in a 2 , 4, 8
sequence
2 ns/ div to 4 0s/ div, in a 2 , 4, 8
sequence
Sample Rate and
Delay Time Accuracy
± 50ppm over any ≥ 1ms time interval
Delta Time Measurement
Accuracy
( Full Bandwidth)
Single-shot , Normal mode
± ( 1 sample interval +100ppm × reading + 0.6ns )
>16 averages
± ( 1 sample interval + 100ppm × reading + 0.4ns )
Sample interval = s/div ÷ 2 0 0
Position Range
DS O5 062 N DS O5 102 N
DS O5 102 M
4ns/ div to 8ns/ div (- 8 div × s/ div) to 20ms
20ns/ div to 80 μ s/ div (- 8 div × s/ div) to 40ms
200 μ s/ div to 40s/ div (- 8 div × s/ div) to 400s
DS O5 202 M
2ns/ div to 10ns/ div (- 4 div × s/ div) to 20ms
Loading ...
Loading ...
Loading ...