Loading ...
Loading ...
Loading ...
Application Examples
DS O5000 Series Digital Storage Oscilloscope User Manual
52
To
set for a single-shot acquisition, follow the steps below.
1. First, set up the oscilloscope probe and the attenuation factor of CH1.
2. Turn the vertical VOLTS/DIV and horizontal SEC/DIV knobs to a proper position for a better
examination of the signal.
3. Press the ACQUIRE button to see the Acquire menu.
4. Push the Peak Detect option button.
5. Push the TRIG MENU button and select Rising for the Slope option. Then adjust the trigger
level properly.
6. Push the SINGLE SEQ button to start the acquisition.
Using this feature can help you to capture occasional events more easily. This is an advantage of
the digital storage oscilloscope.
6.5
6.5
6.5
6.5 Example
Example
Example
Example 5:
5:
5:
5: Using
Using
Using
Using X-Y
X-Y
X-Y
X-Y Mode
Mode
Mode
Mode
Viewing
Viewing
Viewing
Viewing Phase
Phase
Phase
Phase Differences
Differences
Differences
Differences between
between
between
between Two
Two
Two
Two Channel
Channel
Channel
Channel Signals
Signals
Signals
Signals
For example, you need to measure the change in a phase across a circuit network.
Connect the oscilloscope with circuitry and view the input and output of the circuit in XY mode.
Follow the steps below.
1. First, prepare two oscilloscope probes and set the switches to 10X on both probes.
2. Push the CH1 MENU button and set the Probe option attenuation to 10X; push the CH2
MENU button and set the Probe option attenuation to 10X.
3. Connect the CH 1 probe to the input of the network, and connect the CH 2 probe to the output.
4. Push the AUTOSET button.
Loading ...
Loading ...
Loading ...