Loading ...
Loading ...
Loading ...
Basic Operation
DS O5000 Series Digital Storage Oscilloscope User Manual
16
: If this icon lights up, it means the USB disk has been connected.
: This icon lights up only when the USB slave interface is connected with the computer.
5. Readout shows main time base setting.
6. Main Time Base Window
7. Display of window
’
s position in data memory and data length.
8. Window Time Base
9. Operating Menu shows different information for different function keys.
10. Readout shows frequency count.
11. Readout points out horizontal waveform position
12. Trigger Type:
: Edge trigger on the rising edge.
: Edge trigger on the falling edge.
: Video trigger with line synchronization.
: Video trigger with field synchronization.
: Pulse Width trigger, positive polarity.
: Pulse Width trigger, negative polarity.
13. Pop-up Prompt
14. Readout tells trigger level.
15. Icon indicates whether the waveform is inverted or not.
16. 20M Bandwidth Limit. If this icon lights up, it means the bandwidth limit is enabled, otherwise
disabled.
17. Icon indicates channel coupling.
18. Channel Marker
19. Window displays waveform.
5.1.1
5.1.1
5.1.1
5.1.1 XY
XY
XY
XY Format
Format
Format
Format
T he XY format is used to analyze phase differences, such as those represented by Lissajous
patterns. The format plots the voltage on CH 1 against the voltage on CH 2, where CH 1 is the
horizontal axis and CH 2 is the vertical axis. The oscilloscope uses the untriggered Normal
acquisition mode and displays data as dots. The sampling rate is fixed at 1 MS/s.
The oscilloscope can acquire waveforms in YT format at any sampling rate.
You
may view the
same waveform in XY format.
To
perform this operation, stop the acquisition and change the
display format to
XY.
The table below shows how to operate some controls in XY format.
Loading ...
Loading ...
Loading ...