Loading ...
Loading ...
Loading ...
31
AUTOMATIC FAULT WARNINGS
TROUBLE
CODE
POSSIBLE ISSUE
WHAT TO DO
FF
Water inlet system failure
Make sure the water inlet tap is open and water is
flowing.
Separate the inlet hose from the tap and clean the
filter of the hose.
Contact for service if the error continues.
F5
Pressure system failure
Contact for service.
F3
Continuous water input
Close the tap and contact for service.
F2
Inability to discharge water
The water discharge hoses and filters may be
clogged.
Cancel the program.
If the error continues, contact for service.
F8
Heater error
Contact for service.
F1
Overflow
Unplug the machine and close the tap.
Contact for service.
FE
Faulty electronic card
Contact for service.
F7
Overheating
Contact for service.
F9
Divisor position error
Contact for service.
F6
Faulty heater sensor
Contact for service.
HI
High voltage failure
Contact for service.
Practical Information
• When the machine is not in operation:
1. Disconnect the unit and close the tap.
2. Leave the door slightly open to prevent odor formation.
• Select the dry option to remove water droplets.
• Place dishes in the machine properly to achieve efficient energy consumption, washing, and
drying performance. Please see the program and consumption table for more information.
• Rinse dirty dishes before placing them in the dishwasher.
• Only use the Rinse program when necessary.
• Do not place the machine near a refrigerator because it will reach high temperatures.
• If the machine is in an area that is at risk of freezing, close the tap, disconnect the inlet hose
from the tap and drain the water inside the hose and the machine completely.
Loading ...
Loading ...
Loading ...