Loading ...
Loading ...
Loading ...
23
Preparing the Machine
1. Open the door of the dishwasher.
2. Place the dishes in accordance with the instructions in the user manual.
3. Make sure that the upper and lower impellers rotate freely.
4. Put adequate amount of detergent into the detergent dispenser.
5. Check if the Salt and Rinse Aid indicators light and add salt and/or rinse aid if needed.
Program Selection
1. Press the On/Off key to turn on your machine. Note that the door of the dishwasher is
OPEN position.
2. Refer the “Programs Table” to determine a washing program suitable of your dishes.
3. Press program selection key until the number of the program you selected appears on the
display.
In order to start the selected program, the Start/Pause key must be pressed and the door of the
dishwasher must be closed within 4 seconds after the Start/Pause key is pressed.
If the door is not closed within 4 seconds, the machine will not start. In this case; to start the
selected program, the door must be opened, the Start/Pause key must be pressed and the door
must be closed again within 4 seconds after the Start/Pause key is pressed.
If the door of the machine is opened when the machine is running, the machine stops working. If the
door is closed back within 4 seconds after the door is opened, the machine will continue.
If the door stays open for more than 4 seconds, the Start/Pause key must be pressed and the door of the
dishwasher must be closed within 4 seconds after the Start/Pause key is pressed.
Auxiliary Functions
Washing programs of your dishwasher are designed to obtain the best cleaning effect,
considering the type of the soil, soiling degree and properties of the dishes to be washed.
Auxiliary functions are provided in order to enable you to save time, water and energy and to
perform a more comfortable washing with conditions specific to you.
i. Auxiliary functions may cause changes in the program duration.
ii. Auxiliary functions are not suitable for all washing programs. Indicator of the auxiliary
function that is not compatible with the program will not be active. Besides, the machine
gives aural warning via buzzer. The compatibility of the programs and options is shown on
the “PROGRAMS AND OPTIONS TABLE” section.
To add auxiliary function to the program:
1. Select the desired washing program by pressing the program Selection key.
2. In the selected washing program,
if auxiliary function is selected, the corresponding indicator will be active. If the Extra Function key is
pressed again, the corresponding indicator of another auxiliary function will be active.
3. The selection of the auxiliary function will be cancelled when you press the Extra Function key six
times.
Sanitize Options
Sanitize function raises the water temperature in the final rinse.
i. At the end of a successful sanitization, “--” is displayed on the display and End of program
indicator will be active.
ii. Available programs and options are indicated on program Table and Options Table charts
Loading ...
Loading ...
Loading ...