Loading ...
Loading ...
Loading ...
14
To check the water temperature entering the dishwasher:
• Turn on the hot water faucet nearest to the dishwasher for several minutes to clear cool water
from the pipes.
• Hold a candy or meat thermometer in the stream of water to check the temperature.
• If the temperature is below 120°F (49°C), have a qualified technician raise the hot water
heater thermostat setting.
Rinse-Aid Usage
Rinse-aid makes dishes sparkle and helps them to dry without spotting. Rinse-aid is required for
stain-free utensils and clear glasses.
• Use only rinse-aid for domestic dishwashers.
• Filling the rinse-aid reservoir with detergent will damage the reservoir. Only pour rinse-aid
formulated for residential dishwashers into the reservoir.
NOTE: When the Rinse-Aid indicator lights up, the rinse-aid reservoir contains sufficient rinse aid
for 2-3 programs only. When using “Tab” detergents rinse-aid is
not needed.
Filling the Rinse-Aid and Setting
1. To fill the rinse-aid compartment, open the rinse-aid
compartment cap (Fig.A)
2. Fill the compartment with rinse aid to the MAX level and
then close the cap. Be careful not to overfill the rinse aid
compartment and wipe up any spills.
3. Close the cap until it clicks. Otherwise, water can enter the
rinse aid reservoir during a program.
Fig. A
In order to change the rinse aid level, follow the below steps before turning on the machine:
1. Open th
e door of the machine,
2. Press and hold the “Start/Pause + On/Off” key for 3 seconds,
3. Immediately after "--" is seen on the display and the machine gives an audible warning, release "Start/Pause
+ On/Off" key, press and hold the "Program Selection + Cancel" key until "rA" is represented on the display.
The machine will display the last setting,
4. The amount of rinse aid is adjusted by pressing the “Program Selection + Cancel” key,
5. After the adjustment, turn off (by pressing Start/Pause + On/Off key) the machine to save the selected rinse
aid amount. (by pressing Start/Pause + On/Off key) the machine to save the
selected rinse aid amount.
NOTE: If the dishes are not drying properly, are spotted, or there is an increase in the level of
blue stains on your dishes, decrease the level of rinse aid.
Level
Brightener Dose
Indicator
1
Rinse-aid not dispensed r1 is shown on the display.
2
1 dose is dispensed
r2 is shown on the display
3
2 doses are dispensed r3 is shown on the display.
4
3 doses are dispensed
r4 is shown on the display.
5
4 doses are dispensed
r5 is shown on the display.
Loading ...
Loading ...
Loading ...