Loading ...
Loading ...
Loading ...
29
TROUBLESHOOTING
ISSUE
POSSIBLE CAUSE
TROUBLESHOOTING
The
program does not
start.
Your Dishwasher is not plugged
in.
Plug your Dishwasher in.
Your Dishwasher is not turned on.
Turn your Dishwasher on by pressing
the On/Off button.
The fuse has blown out.
Check your indoor fuses.
The water inlet tap is closed.
Turn on the water inlet tap.
Your Dishwasher door is open.
Close the Dishwasher door.
The water inlet hose and
machine
filters are clogged.
Check the water inlet hose and
machine filters and make sure they are
not clogged.
Water
remains inside
the machine.
The water drain hose is clogged
or twisted.
Check the drain hose, then either
clean or untwist it.
The filters are clogged.
Clean the filters.
The program is not finished yet.
Wait until the program is finished.
The
machine stops
while washing.
Power failure.
Check the main power source.
Water inlet failure.
Check the water tap.
Shaking and banging
noises
are heard while
washing.
The spray arm is hitting the
dishes in the lower basket.
Rearrange or remove items blocking the
spray arm.
Food
particles stay on
the dish after the
washing cycle is
complete.
Dishes placed incorrectly,
sprayed water not reaching
affected dishes.
Do not overload baskets.
Dishes are leaning against each
other.
Place dishes as instructed in the
section onloading your dishwasher.
Not enough detergent was used.
Use the correct amount of detergent, as
instructed in the program table.
The wrong wash program was
selected.
Use the information in the program table
to select the most appropriate program.
Spray arms clogged with food
waste.
Clean the holes in the spray arms with
thin objects.
Filters or water drain pump
clogged or filter misplaced.
Check that the drain hose and filters are
correctly fitted.
Loading ...
Loading ...
Loading ...