Loading ...
Loading ...
Loading ...
See appropriate section in manual unless directed to an authorized
Service Center.
PROBLEM CAUSE CORRECTION
Grass catcher !. Cutting height too low. 1, Raise cutting height.
not filling 2. Lift on blade worn off. 2. Replace blade.
(If so equipped) 3. Catcher not venting air. 3. Clean grass catcher.
Hard to push 1, Raise cutting height.1. Grass is too high or wheel
height is too low,
2. Rear of lawn mower
housing or cutting blade
dragging in grass.
3, Grass catcher too full,
4. Handle height position not
right for you.
2. Raise rear of tawn mower
housing one (I) setting
higher.
3. Empty grass catcher,
4. Adjust handle height to suit.
Loss of drive 1. Belt wear. 1. ChecWreplace drive belt.
or slowing of 2. Belt off of pulley, 2. Check/reinstall drive belt.
drive speed 3. Drive cable worn or broken. 3. Replace drive cable.
4. "Loose" drive control system, 4. Adjust drive control,
Loading ...
Loading ...
Loading ...