Loading ...
Loading ...
Loading ...
"DUAL BAIL" DRIVE CONTROL
• To start forward motion, lift drive control
bar up to handle.
• To stop forward motion, release drive
control bar.
DRIVE CONTROL ENGAGED
DRfVE CONTROL DISENGAGED
"AUTOWALK" DRIVE CONTROL
• Self-propelling is controlIed by holding
the operator presence control bar down
to the handle and pulling the drive con-
trol lever(s) rearward to the handle, The
farther toward the handle the lever(s)
are pulled, the faster the unit will travel,
• Forward motion will stop when either
the operator presence control bar or a
drive control lever are released. To stop
forward motion without stopping engine,
release the drive control lever(s) only.
Hold operator presence control bar
down against handle to continue mowing
without self-propelling.
NOTE: If after releasing the drive control the
mower wilI not roll backwards, push the mower
forward slightly to disengage drive wheels.
TO ENGAGE DRIVE CONTROL
lurnbuckle
DRIVE CONTROL DISENGAGED
FRONT WHEEL DRIVE MODELS ONLY:
° To keep drive control engaged when
turning corners, push down on the
handle to lift the front wheels off the
ground while turning lawn mower.
18
Loading ...
Loading ...
Loading ...