Loading ...
Loading ...
Loading ...
OPERATOR PRESENCE CONTROL
BAR (ALL MODELS)
Your lawn mower is equipped with an op-
erator presence control bar which requires
the operator to be positioned behind the
lawn mower handle in order to start and
,_cerate the lawn mower.
AUTION: Federal regulations require
an engine control to be installed on this
lawn mower in order to minimize the risk
of blade contact injury. Do not under
any circumstances attempt to defeat the
function of the operator control. The blade
turns when the engine is running.
DRIVE CONTROL
"STANDARD" DRIVE CONTROL
• Self-propelling is controlled by holding
the operator presence control bar down
to the handle and pushing the drive
control lever forward until it clicks; then
releasing the lever,
• Forward motion will stop when the op-
erator presence control bar is released.
To stop forward motion without stopping
engine, release the operator presence
control bar slightly until the drive control
disengages, Hold operator presence
control bar down against handle to con-
tinue mowing without self-propelling.
• To keep drive control engaged when
turning corners, push down on handle
and lift front wheels off ground while
turning lawn mower.
Drive
control
TO ENGAGEDRIVECONTROL
\
Operator
presence
control bar
DRIVE CONTROL DISENGAGED
17
Loading ...
Loading ...
Loading ...