Loading ...
Loading ...
Loading ...
3 POSITION "QUICK" HANDLES
The handle on your lawn mower has three
{3) height positions - adjust to height that
suits you.
• Squeeze the bottom ends of lower
handle towards each other until the pin
in handle can be inserted into one of the
three height adjustment holes.
High
Handle
Medium adjustment
bracket
SOL
Lc
TO REMOVEIREPLACEDR|VEBELT
FRONT WHEEL DRIVE MODELS:
"STANDARD" OR "DUAL BAIL" MODELS:
• Remove drive cover. Remove belt from
gearcase pulley by pushing down on
pulley and rolling belt off it.
• Turn lawn mower on its side. See
engine manual for proper direction of
turning over the engine.
° Remove blade.
• Remove belt from engine pulley on
crankshaft.
• Install new belt by reversing above steps.
NOTE: Always use factory approved belt
to assure fit and long life.
PUSH
DOWN...,
Drive
cover
Pulle_
"QUICK RELEASE" HANDLES
The upper handle may be adjusted to
three (3) different height positions.
1. Loosen both handle levers enough to
altow the upper handle to pivot to the
desired adjustment position.
2. Tighten both handle levers securely.
LEVERS
DOWN
TO ADJUST
HANDLE
\
\
"AUTO WALK" or"VARI-SP EED" MODELS:
° Remove drive cover and belt keeper.
• Remove belt from gearcase pulley by push-
ing down on pulley and rolling belt off it.
• Turn lawn mower on its side. See
engine manual for proper direction of
turning over the engine.
• Remove blade and debris shield.
• Remove belt from engine pulley on
crankshaft,
• Instart new belt by reversing above
steps,
NOTE: Always use factory approved belt
to assure fit and long life.
Drive
cover
\
Belt
PUSH
DOWN
Loading ...
Loading ...
Loading ...