Loading ...
Loading ...
Loading ...
569
uuChecking and Maintaining Tyres uWear Indicators
Maintenance
Wear Indicators
The groove where the wear indicator is
located is 1.6 mm (1/16 inch) shallower than
elsewhere on the tyre. If the tread has worn so
that the indicator is exposed, replace the tyre.
Worn out tyres have poor traction on wet
roads.
Tyre Service Life
The life of your tyres is dependent on many factors, including driving habits, road
conditions, vehicle loading, inflation pressure, maintenance history, speed, and
environmental conditions (even when the tyres are not in use).
In addition to regular inspections and inflation pressure maintenance, it is
recommended that you have annual inspections performed once the tyres reach five
years old. All tyres should be removed from service after 10 years from the date of
manufacture, regardless of their condition or state of wear.
1Checking Tyres
Have a dealer check the tyres if you feel a consistent
vibration while driving. New tyres and any that have
been removed and reinstalled should be properly
balanced.
High speed driving
We recommend that you do not drive faster than the
posted speed limits and conditions allow. If you drive
at sustained high speeds (over 160 km/h/100 mph),
adjust the cold tyre pressures as shown below to
avoid excessive heat build up and sudden tyre failure.
Tyre Size 185/60R15 88H
Pressure Front: 260 kPa (2.6 bar) 38 psi
Rear: 250 kPa (2.5 bar) 36 psi
Tyre Size 185/55R16 87H
Pressure Front: 270 kPa (2.7 bar) 39 psi
Rear: 260 kPa (2.6 bar) 38 psi
Models without 185/60R16 tyres
a Example of a Wear Indicator
mark
21 JAZZ HYBRID SSS-32TZA6000.book 569 ページ ２０２０年１月２９日 水曜日 午前１０時３２分
Loading ...
Loading ...
Loading ...