Loading ...
Loading ...
Loading ...
64
31-1000600 Rev. 0
3/4” CUSTOM DECORATIVE PANEL DIMENSIONS
For a more custom appearance, overlay panels may be
installed to give a flush appearance with surrounding cabinets.
The overlay panel must be 3/4” (1.91cm) thick. Panel attaches
to included brackets to provide mounting to the appliance door.
NOTE: We recommend that decorative panels have inside
corners and edges rounded or beveled by cabinet maker to
avoid sharp edges on the panels. Edges to be treated should
include the top, bottom and hinge side edges.
IMPORTANT NOTE: Maximum panel weight is 45 lbs.
NOTE: For panels constructed with rails and stiles (5-panel), the
rails and stiles must be a minimum of 2” (5.08cm) wide.
For Stainless Panel Kits, see Stainless Steel Door Panel
Installation on page 45.
For Custom Panels, use templates provided with the units to
pre-drill holes for mounting panel brackets (provided with unit).
Adjustment screws and instructions are provided.
Design Guide - Custom Overlay Door Panel
CUSTOM HANDLE DESIGN GUIDE
Custom handles must be used for flush installation. For
custom handle installation, counter-bore holes in rear of
decorative panels must ensure 1/2” (1.27cm) material
thickness remains for handle support.
NOTE: The counterbore must not exceed 1” (2.54cm) in
diameter.
Minimum distance from
panel side edge to
handle center should
be 1-1/2” (3.81 cm) as
shown.
1/4"
(0.64cm)
1/2"
(1.27cm)
3/4"
(1.91cm)
Door
Panel
B
A
WARNING
d
Door Trim Pinch Point
Hazard
Improper installation can lead to a finger pinch point hazard
between the side door trim and the cabinets when operating
the door, especially with children. To minimize this risk you
must follow the installation instructions for cabinet dimen-
sions, trim assembly, and door stop angle.
Panel
Dimension
18” Models 24” Models 30” Models
A 17-9/16”
(44.61cm)
23-9/16”
(59.85cm)
29-9/16”
(75.09)
B 79-7/8”
(202.88cm)
79-7/8”
(202.88cm)
79-7/8”
(202.88cm)
IMPORTANT: Custom decorative
door panel width dimensions are
GLႇHUHQWIRUVLQJOHPRGHODQG
dual model installations.
1-1/2”
Hinge
Side
Handle
Side
AVERTISSEMENT
d
Risque de pincement
de doigts. IUne installation incorrecte peut poser un risque
de coincement de doigts entre la garniture de porte latérale
et les armoires en manipulant la porte, en particulier pour
les enfants. Pour réduire ce risque, vous devez suivre les
instructions d’installation relatives aux dimensions d’armoire,
au montage des garnitures et à l’angle de l’arrêt de porte.
ADVERTENCIA
d
Riesgo de
Lastimadura con el Borde de la Puerta
Una instalación inadecuada puede conducir a riesgos de
pellizcos de dedos entre el borde lateral de la puerta y
los gabinetes al utilizar la puerta, especialmente con los
niños. A fin de minimizar este riesgo, usted deberá seguir
las instrucciones de instalación para dimensiones de
gabinetes, ensambles de bordes y ángulos de detención de
puertas.
Loading ...
Loading ...
Loading ...