Loading ...
Loading ...
Loading ...
59
31-1000600 Rev. 0
Installation Instructions - Stainless Door Panel
Stainless Steel Door Panel Kits are available with either
Euro handles or Pro handles.
Stainless steel panel is fully assembled with brackets
and handle already installed
as a LH or RH swing door.
LH door kits can be modified to fit RH swing units and
RH door kits can be modified to fit LH swing units.
Leave the protective film on the door until the
installation is complete.
WARNING
Door Trim Pinch
Point Hazard
Improper installation can lead to a finger pinch point
hazard between the side door trim and the cabinets
when operating the door, especially with children.
To minimize this risk you must follow the installation
instructions for cabinet dimensions, trim assembly, and
door stop angle.
STEP 1
INSTALL STAINLESS PANEL
Ŷ Remove bottom hinge cover and retain the 4 T30
Torx screws for later installation.
Ŷ Open door to 90°. Slide the
panel onto the door with the
panel brackets interlocking
on top and bottom with the
door brackets (make sure
not to slide the panel into
the cabinetry surround).
Center the panel on the
door, then slowly close
the door while watching to
make sure the panel does
not contact the surrounding
cabinetry.
Ŷ With the door fully closed,
carefully slide the panel towards
the cabinetry with the goal gap
of 1/8”.
STEP 2 ADJUST
STAINLESS
PANEL
Ŷ Door adjustments will be
made with 12 set screws
provided. Each corner
of the door will use 3
adjustment set screws.
Use a 1/8” allen wrench
to install the set screws in
the order as instructed.
Ŷ The set screws behind
the top and bottom
support brackets are
partially hidden.
Bottom
hinge
cover
T30 Torx
screws
Door
Bracket
Panel
Bracket
Panel
1/8” gap
Cabintery
Surround
Overlay
Panel
Set
Screws
Hidden Set
Screw
Set
Screws
AVERTISSEMENT
d
Risque de pincement
de doigts.
IUne installation incorrecte peut poser un risque
de coincement de doigts entre la garniture de porte latérale
et les armoires en manipulant la porte, en particulier pour les
enfants. Pour réduire ce risque, vous devez suivre les ins-
tructions d’installation relatives aux dimensions d’armoire, au
montage des garnitures et à l’angle de l’arrêt de porte.
ADVERTENCIA
Riesgo de
Lastimadura con el Borde de la Puerta
Una instalación inadecuada puede conducir a riesgos de
pellizcos de dedos entre el borde lateral de la puerta y los ga-
binetes al utilizar la puerta, especialmente con los niños. A fin
de minimizar este riesgo, usted deberá seguir las instruccio-
nes de instalación para dimensiones de gabinetes, ensambles
de bordes y ángulos de detención de puertas.
ZK1SN189NLH LH 18” Stainless Steel Door Panel
ZK1SN184NRH RH 18” Stainless Steel Door Panel
ZK1SN249NLH LH 24” Stainless Steel Door Panel
ZK1SN244NRH RH 24” Stainless Steel Door Panel
ZK1SN309NLH LH 30” Stainless Steel Door Panel
ZK1SN304NRH RH 30” Stainless Steel Door Panel
ZK1SN369RLH LH 36”Stainless Steel Door Panel
ZK1SN364RRH RH 36”Stainless Steel Door Panel
ZKSP1H1CNSS Minimalist Handle for Stainless
Steel Panels Only
ZKSP1H1PNSS Statement Handle for Stainless
Steel Panels Only
Loading ...
Loading ...
Loading ...