Tripp Lite SMX500RT1U SmartPro 230V 500VA 300W Line-Interactive UPS, 1U Rack/Tower, Network Card Options, USB, DB9 Serial

Owner's Manual - Page 9

For SMX500RT1U. Also, The document are for others Tripp Lite models: SMART500RT1U

PDF File Manual, 68 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
9
Basic Operation
Other UPS Features (Rear Panel)
C13
NEMA 5-15R
AC Receptacles: Your UPS features C13 outlets (SMX500RT1U) or NEMA
5-15R outlets (SMART500RT1U). These outlets provide your connected
equipment with AC line power during normal operation and battery power during
blackouts and brownouts. The UPS protects equipment connected to these
receptacles against damaging surges and line noise. If you have a serial or
USB connection to your UPS, you can remotely reboot connected equipment
by turning receptacles OFF and ON using Tripp Lite’s PowerAlert software.
Models also feature outlets labeled “UNSWITCHED” which may not be remotely
turned off.
Communications Ports (USB or RS-232): These ports connect your UPS to
any workstation or server. Use with Tripp Lite’s PowerAlert software and included
cables to enable your computer to automatically save open files and shut down
equipment during a blackout. Also use PowerAlert to monitor a wide variety of
AC line power and UPS operating conditions. Consult your PowerAlert manual or
contact Tripp Lite Customer Support for more information. See “USB and
RS-232 Serial Communications” in the “Optional Installation” section for
installation instructions.
EPO (Emergency Power Off) Port: Your UPS features an EPO port that may be
used to connect the UPS to a contact closure switch to enable emergency
inverter shutdown. See “Optional Installation” section.
Accessory Slot: Remove the small cover panel from this slot to install optional
accessories to remotely monitor and control your UPS. Refer to your
accessory’s manual for installation instructions. Contact Tripp Lite at
tripplite.com/support for more information, including a list of available SNMP,
network management and connectivity products.
Input Breaker(s): Protect an electrical circuit from overcurrent draw from the
UPS load. If one or more breakers trip, remove some of the load, then reset
them by pressing the breaker(s) in.
Ground Screw: Use this to connect any equipment that requires a chassis
ground.
21-10-019-933903-Book.indb 921-10-019-933903-Book.indb 9 10/14/2021 3:37:48 PM10/14/2021 3:37:48 PM
Loading ...
Loading ...
Loading ...