Loading ...
Loading ...
Loading ...
Note
Only 1 license plate can be captured at one me for each lane.
6.
Select Region
and Country/Region.
7.
Select the license plate informaon upload mode.
Entrance/Exit The license plate informaon of the detected vehicle will be uploaded when
the vehicle passes the de
tecon area and triggers the detecon in entrance/
exit.
City Street The license plate informaon of the detected vehicle will be uploaded when
the vehicle passes the de
tecon area and triggers the detecon in city
streets.
Alarm Input It means the input alarm will trigger a license plate capture and recognion
acon.
Note
●
When Alarm Input is select
ed, the alarm input A<-1 will aut
omacally be assigned to trigger
vehicle detecon and its alarm type is always NO.
●
If the A<-1 alarm input is used to trigger vehicle detecon, it can not be used for other basic
events.
●
When Alarm Input is selected and saved, previously congured linkage method for A<-1 will
be canceled.
8.
Select the Detecon mode.
9.
Check R
emo
ve Duplicated License Plates ans set the Time Interval. The default me interval is 4
minutes.
Note
Up to 8 license plates are supported.
10.
Set arming schedule and link
age method. For the arming schedule sengs, refer to
Set Arming
Schedule . For the linkage method sengs, r
efer to
Linkage Method Sengs .
11.
Click Sav
e.
10.1.2 Set Mixed-Trac Detecon Rule
The motor vehicle, non-motor vehicle, and pedestrian that enter the set lane can be detected, and
the picture of targets can be captured and stored. Alarm will be triggered and capture can be
uploaded.
Before You Start
Go to Conguraon → System → System Sengs → VCA Resources
, and select Road Trac.
Network Camera User Manual
88
Loading ...
Loading ...
Loading ...