Hikvision DS-2DF8442IXS-AELW User Manual

Loading ...

10.4 SNMP

You can set the SNMP network management protocol to get the alarm event and excepon

messages in network transmission.

Before You Start

Before seng the SNMP, you should download the SNMP soware and manage to receive the

device informaon via SNMP port.

Steps

Go to the sengs page: Conguraon → Network → Advanced Sengs → SNMP .

Check Enable SNMPv1, Enable SNMP v2c or Enable SNMPv3.

Note

The SNMP version you select should be the same as that of the SNMP soware.

And you also need to use the dierent version according to the security level required. SNMP v1

is not secure and SNMP v2 requires password for access. And SNMP v3 provides encrypon and

if you use the third version, HTTPS protocol must be enabled.

Congure the SNMP sengs.

Click Save.

10.5 Access to Device via Domain Name

You can use the Dynamic DNS (DDNS) for network access. The dynamic IP address of the device can

be mapped to a domain name resoluon server to realize the network access via domain name.

Before You Start

Registraon on the DDNS server is required before conguring the DDNS sengs of the device.

Steps

Refer to TCP/IP to set DNS parameters.

Go to the DDNS sengs page: Conguraon → Network → Basic Sengs → DDNS .

Check Enable DDNS and select DDNS type.

DynDNS

Dynamic DNS server is used for domain name resoluon.

NO-IP

NO-IP server is used for domain name resoluon.

Input the domain name informaon, and click Save.

Check the device ports and complete port mapping. Refer to

Port to check the device port , and

refer to Port Mapping for port mapping sengs.

Access the device.

By Browsers Enter the domain name in the browser address bar to access the device.

Network Speed Dome User Manual

Loading ...

Hikvision DS-2DF8442IXS-AELW 4MP Outdoor PTZ Network Dome Camera with Night Vision, Heater & Wiper