Hikvision DS-2DF8442IXS-AELW User Manual

Loading ...

Set Log Server

The log server should support syslog (RFC 3164) over TLS.

Before You Start

●

Install client and CA cercates before conguraon. Refer to Cercate Management for

detailed informaon.

●

Select cercates according to the requirement of the log server. If two-way authencaon is

required, select the CA cercate and the client cercate. If one-way authencaon is

required, select the CA cercate only.

Steps

Check Enable Log Upload Server.

Oponal: Check Enable Encrypted Transmission if you want the log data to be encrypted.

Input Log Server IP and Log Server Port.

Oponal: Select client cercate.

Select CA cercate to the device.

Click Test to test the sengs.

Click Save.

11.12.6 Set QoS

QoS (Quality of Service) can help improve the network delay and network congeson by seng

the priority of data sending.

Note

QoS needs support from network device such as router and switch.

Steps

Go to Conguraon → Network → Advanced Conguraon → QoS .

Set Video/Audio DSCP, Alarm DSCP and Management DSCP.

Note

Network can idenfy the priority of data transmission. The bigger the DSCP value is, the higher

the priority is. You need to set the same value in router while conguraon.

Click Save.

11.12.7 Set IEEE 802.1X

You can authencate user permission of the connected device by seng IEEE 802.1X.

Go to Conguraon → Network → Advanced Sengs → 802.1X , and enable the funcon.

Network Speed Dome User Manual

101

Loading ...

Hikvision DS-2DF8442IXS-AELW 4MP Outdoor PTZ Network Dome Camera with Night Vision, Heater & Wiper