Hikvision DS-2DF8442IXS-AELW User Manual

Loading ...

4.6 Set Inial Posion

Inial posion refers to the relave inial posion of the device azimuth. You can set the inial

posion if you need to select one point in the scene as the base point.

Steps

Go to Conguraon → PTZ → Inial Posion .

Move the device to the needed posion by manually controlling the PTZ control buons.

Click Set to save the informaon of inial posion.

Call The device moves to the set inial posion.

Clear Clear the set inial posion.

4.7 Set Scheduled Tasks

You can set the device to perform a certain task during a certain period.

Steps

Go to Conguraon → PTZ → Scheduled Tasks .

Check Enable Scheduled Task.

Select the task type and set the period. For seng the period, refer to

Set Arming Schedule .

Repeat step 3 to set more than one scheduled tasks.

Set Park Time. During the set task period, if you operate the device manually, the scheduled task

will be suspended. When the manual operaon is over, the device will connue to perform the

scheduled task aer the set park me.

Click Save.

Note

If you want to clear all scheduled tasks, go to Conguraon → PTZ → Clear Cong , check Clear

All Scheduled Tasks, and click Save.

4.8 Set Park Acon

You can set the device to perform an acon (for example, preset or patrol) or return to a posion

aer a period of inacvity (park me).

Before You Start

Set the acon type rst. For example, if you want to select patrol as park acon, you should set the

patrol. See Set Patrol Scan for details.

Steps

Go to Conguraon → PTZ → Park Acon .

Check Enable Park Acon.

Network Speed Dome User Manual

Loading ...

Hikvision DS-2DF8442IXS-AELW 4MP Outdoor PTZ Network Dome Camera with Night Vision, Heater & Wiper