Loading ...
Loading ...
Loading ...
Step 2: Align the wire plug on the motor with the corresponding plug on the machine.
Step 3: Connect the engraving machine frame, electric control box and computer wiring
(refer to the wiring diagram for connection). The aerial plug-in cable is connected
between the rack and the electric control box. The connection will be affixed with
X, Y, Z, A (purchasing A-axis), spindle, spindle cooling water pump (4060 model)
corresponding to the aviation plug and The interfaces with the same identification
after the electric control box are connected one by one. Connect the USB cable
between the electric control box and the computer. Be sure to connect the wiring.
Otherwise, the computer will not be able to control the machine. Finally, connect the
power cable.
3020/3040 model wiring diagram
Label name
Port description
X
X-axis motor
Y
Y-axis motor
Z
Z-axis motor
A
A-axis motor
SPINDLE
Spindle motor
TOOL
Tool set
USB
Connect the data cable to the
computer
4060 model wiring diagram
Label name
Port description
X
X-axis motor
Y
Y-axis motor
Z
Z-axis motor
A
A-axis motor
TOOL
Tool set
PUMP
Spindle motor cooling water pump
VFD
Frequency conversion spindle
USB
Connect the data cable to the
computer
Loading ...
Loading ...
Loading ...