Loading ...
Loading ...
Foreword
First of all, thank you for purchasing and using our products. Please read
this instruction before installing your machine, so as not to cause
unnecessary trouble for your installation and use.
The equipment is tested before leaving the factory and meets the
shipping standards. Before using, please read the following precautions
carefully:
1. The machine has been rigorously tested before leaving the factory to
ensure that all functions of the machine are in good condition, but the
machine must be transported by logistics. When receiving the goods,please
make sure that the outer packaging of the product is complete and
unpacking. Please check the goods afterwards. If there is any problem, please
contact the after-sales personnel in time;
2. The machine is connected with the computer by USB, the computer
used for control should be dedicated, and as far as possible, do not install
other unrelated application software;
3.Please ensure that there is a grounding function for the power supply
socket. If there is no grounding, please perform external grounding.
4. This unit uses single-phase AC 220V, 50Hz (single-phase AC110V,
50/60Hz in some areas), if not allowed, please Do not disassemble it in order
to avoid danger;
5. When processing, it is relatively large when it comes to cutting chips.
Especially when processing metal materials, please wear protective glasses to
prevent metal chips from flying out and hurt your eyes.
6. Do not approach the spindle rotating at high speed during machining.
Do not touch the workpiece being processed by hand to avoid danger.
7.If accidents are found during work, please turn off the power in time
and wait for a while before re-use. If the problem is still not solved, please
contact the after-sales personnel.
Loading ...
Loading ...
Loading ...