Loading ...
Loading ...
Loading ...
W415-1101 / B / 07.29.13
7
EN
SIDE VIEW
BATTERY
SUPPORT
PLATE
VALVE
HOUSING
BATTERY
SUPPORT
BATTERY
CASE
HEAT SHIELD
3.0 INSTALLATION
The appliance and gas logs function as a system. If the appliance is not drafting properly and spilling into the
room (check with a match or a smoke stick), reposition the damper clamp until a positive draft is obtained
by opening the damper. If negative pressure in home prevents having a positive draft, consult an air quality
specialist.
3.1 BATTERY INSTALLATION
!
WARNING
THIS APPLIANCE MUST BE INSTALLED IN A SOLID-FUEL BURNING FIREPLACE WITH A WORKING
FLUE AND CONSTRUCTED OF NON-COMBUSTIBLE MATERIAL.
A. 4 (1.5 V) AA size batteries are supplied and included in the manual bag.
B. Remove the 2 screws securing the support plate to gain access to the battery case, as shown below.
C. Install the four batteries into the battery case.
D. Insert the assembled battery case into the battery support. Ensure that the heat insulation gasket
covers the top and left side of the battery case, as shown below
E. Reinstall the battery support plate.
Loading ...
Loading ...
Loading ...