Loading ...
Loading ...
Loading ...
Operation Manual
203
Figure 5-92 Alarm linkage
Step 2 Select the
Enable
check box to enable the alarm linkage function.
Step 3 Select a relay-in port and a sensor type.
●
Sensor Type: NO or NC.
●
Anti-Dither: Only record one alarm event during the anti-dither period.
Step 4 Set arming periods and alarm linkage action. For details, see "5.1.1 Alarm Linkage".
Step 5 Click
Save
.
5.18.2 Relay-in (2)
You can select the mode from
Alarm
and
Arming/Disarming
.
Figure 5-93 Select the mode
●
When selecting
Alarm
, the function is same as Relay-in (1). For details, see "5.18.1 Relay-in (1)".
●
When selecting
Arming/Disarming
, you can enable arming or disarming mode through one
press on an external alarm system.
Step 1 Select
Enable
check box to enable the alarm function.
Step 2 Select a relay-in port, for details, see "5.18.1 Relay-in (1)".
Step 3 In the
Mode
list, select
Arming/Disarming.
Loading ...
Loading ...
Loading ...