Loading ...
Loading ...
Loading ...
Operation Manual
92
4.6.12.2 Mobile Setting
Configure the mobile phone, and all alarm messages support sending message the configured
receiver. After receiving a message, the receiver can active the camera and connect it to 5G network
through message or call.
●
Message send: Set the receiver's phone number, and when an alarm is triggered, the system will
send message to the receiver.
●
Message activation: Set the sender's phone number, the sender can send command message to
active the camera. The commands are as following:
◇
On: Make the camera online.
◇
Off: Make the camera offline.
◇
Reboot: Restart the camera.
●
Phone activation: Set the receiver's phone number, the caller can call the camera to active the
camera, and make it online.
Step 1 Select
Setting
>
Network
>
5G
>
Mobile Setting
.
Step 2 Select
Message send
,
Message activation
, or
Phone activation
as needed.
Step 3 Enter the phone numbers of receiver, sender, or caller, and click to add it to the list.
●
Select a phone number, and click to delete it.
●
You can edit the message in
Title
during configuration.
Figure 4-86 Mobile setting
4.6.13 Access Platform
4.6.13.1 P2P
P2P is a private network traversal technology which enables users to manage devices easily without
requiring DDNS, port mapping or transit server.
Scan the QR code with your smart phone, and then you can add and manage more devices on the
Loading ...
Loading ...
Loading ...