Loading ...
Loading ...
Loading ...
Operation Manual
194
Zoom configuration is only available on recording & broadcasting devices.
Procedure
Step 1 Select
Setting
>
Event
>
Stereo Analysis
>
Zoom Configuration
.
Step 2 Configure the zoom.
●
Method 1: Click
Calibration Area
, and then draw a rectangular box in the image, which
is size of the enlarged image of sub stream 1.
●
Method 2: Set the zoom value. For example, if you want the target to be 1/5 of the
image, set the zoom value to 5.
●
When calibrating the zoom for Stand Detection, make sure that there is 1 person in the
image at least.
●
When calibrating the zoom for People No. Error, make the calibration box in the center
of the image, and the zoom value larger than 3. Some models only support calibration
by drawing calibration area.
Figure 5-81 Calibration configuration (stereo analysis)
Step 3 Click
Save.
5.15.4 Viewing Report
Working with a recording & broadcasting server, the camera monitors the target's positions in the
front of the classroom and analyzes the data, and then generates a report.
Prerequisites
You have set at least one rule in
Setting
>
Event
>
Stereo Analysis
>
Stereo Analysis
.
Procedure
Step 1 Select
Setting
>
Event
>
Stereo Analysis
>
Report
.
Step 2 Select the start time and end time.
Loading ...
Loading ...
Loading ...