Loading ...
Loading ...
Loading ...
Operation Manual
187
●
Traffic Congestion
: The system counts the vehicles in the detection area. When the
counted vehicle number and the continuous congestion time exceed the configured
values, an alarm is triggered and the system performs an alarm linkage.
●
Parking Upper Limit
: The system counts the vehicles in the detection area. When the
counted vehicle number exceeds the configured value, an alarm triggered and the
system performs an alarm linkage.
Step 4 Click
Draw Area
to draw a detection area in the image.
Step 5 Set parameters.
Table 5-20 Description of people counting parameters
Parameter Description
Repeat Alarm Time
After the alarm is triggered, if the status lasts for the configured
time in
Repeat Alarm Time
, the alarm will be triggered again.
0
indicates that the function is disabled.
Vehicle Congestion Alarm
Select the check box, and set the
Threshold
and
Continuous
Congestion Time
.
When the counted vehicle and the continuous congestion time
exceed the configured values, an alarm is triggered.
Upper Limit Vehicle
Quantity Alarm
Select the check box, and set the
Threshold
.
When the counted vehicle exceeds the configured values, an
alarm is triggered.
Pixel Counter
Click
Draw Target
next to
Pixel Counter
, and then press and hold
the left mouse button to draw a rectangle, the
Pixel Counter
then
displays its pixel.
Step 6 Set arming periods and alarm linkage actions. For details, see "5.1.1 Alarm Linkage".
Step 7 Click
Save
.
To view alarm information on the
Alarm
tab, subscribe relevant alarm event. For details,
see "5.1.2 Subscribing Alarm".
Result
You can view the counting result on the
Live
interface.
●
For
Traffic Congestion
rule, the entry and exit numbers are displayed.
●
For
Parking Upper Limit
rule, the inside number is displayed.
Loading ...
Loading ...
Loading ...