Loading ...
Loading ...
Loading ...
Operation Manual
93
mobile phone client.
Step 1 Select
Setting
>
Network
>
Access Platform
>
P2P
.
Figure 4-87 P2P
●
When P2P is enabled, remote management on device is supported.
●
When P2P is enabled and the device accesses to the network, the status shows online.
The information of the IP address, MAC address, device name, and device SN will be
collected. The collected information is for remote access only. You can cancel
Enable
selection to reject the collection.
Step 2 Log in to mobile phone client and tap
Device management
.
Step 3 Tap the
+
at the upper right corner.
Step 4 Scan the QR code on the
P2P
interface.
Step 5 Follow the instructions to finish the settings.
4.6.13.2 ONVIF
The ONVIF authentication is
On
by default, which allows the network video products (including
video recording device and other recording devices) from other manufacturers to connect to your
device.
ONVIF is enabled by default.
Step 1 Select
Setting
>
Network
>
Port
>
ONVIF
.
Loading ...
Loading ...
Loading ...