Loading ...
Loading ...
Loading ...
Operation Manual
100
Parameter Description
Customized Picture Name
Click
Setting
to set picture name.
●
Date&Time
is required, and it is selected by default.
●
Select the other fields of the name, and the corresponding
instruction will be displayed on the screen.
●
Double-click the symbols under
Separator
, you can customize
the separator.
●
Double-click
Custom
, you can customize the files of the
picture name.
●
Click the arrow under
Ordering
, and you can adjust the
ordering of the file.
Date&Time
and
Millisecond
is a whole, click the arrow of any
one of the two fields, the two moves together.
●
The real-time value of
Millisecond
will be displayed for precise
snapshot, and for schedule and normal event, the millisecond
displays 0000.
Emergency (Local)
Select
Emergency (Local)
, and when the FTP server does not work,
all the files are saved to the internal SD card.
Step 4 Click
Save
.
Step 5 Click
test
to test whether FTP function works normally.
4.7.3.4 NAS
This function can be enabled only when NAS was selected as a destination path. Enable this
function, and you can save all the files in the NAS.
Step 1 Select
Setting
>
Storage
>
Destination
>
NAS
.
Figure 4-95 NAS
Step 2 Select the
Enable
check box to enable NAS function, and select NAS protocol type.
●
NFS
(Network File System): A file system which enables computers in the same network
to share files through TCP/IP.
●
SMB
(Server Message Block): Provides shared access for clients and the server.
Step 3 Configure NAS parameters.
Table 4-35 Description of NAS parameters
Parameter Description
Server Address The IP address of the NAS server.
Username
When selecting
SMB
protocol, you are required to enter user
Loading ...
Loading ...
Loading ...