Loading ...
Loading ...
Loading ...
6 Owner’s Manual for Lawn Edger
General Information and Setup
Specifications
Emissions
The United States Environmental Protection Agency (US
EPA) (and California Air Resources Board (CARB), for
engines/equipment certified to California standards)
requires this engine/equipment to comply with exhaust
and evaporative emissions standards. Locate the emis-
sions compliance decal on the engine to determine appli-
cable standards. See the included emissions warranty for
emissions warranty information. Follow the maintenance
specifications in this manual to ensure the engine com-
plies with applicable emissions standards for the duration
of the product’s life.
Remove Contents from Carton
Proceed as follows to remove parts and unit from carton:
1. Remove all parts and packaging components. Ver-
ify the following components are included:
NOTE: Contact an IASD if any parts are damaged or
missing.
2. Cut all four vertical edges of the carton and lay side
panels flat around edger.
3. Remove any remaining packaging.
4. Roll unit out from carton and place on a level sur-
face.
Engine 4-stroke OHV
Engine speed 3000 rpm
Displacement 163cc
Torque rating 6.5 ft-lbs (8.8 Nm) gross torque per SAE J1940
Fuel capacity (qt / L) 3.5 / 3.3
Oil capacity (oz / mL) 19 / 562
Fuel type Unleaded gasoline
Blade diameter (in / cm) 9 / 22.8
Cutting depth (in / mm) 0.0–3.0 / 0.0–76
Wheels (in / cm) 8.0 / 20.3
Handlebars Straight
Machine dimensions (in / cm) 45 x 19 x 39.5 / 114.3 x 48.3 x 100.3
Machine weight (lbs / kg) 71 / 32
Part Qty.
Edger 1
Owner’s manual 1
Upper handlebar 1
Control rod 1
Hair pins 2
Plastic wing nuts (M8) 2
M8 x 35mm bolts 2
Wire tie 1
Spark plug socket wrench w/rod 1
Loading ...
Loading ...
Loading ...