Loading ...
Loading ...
Loading ...
18
17
3a. If more than one bill is being pulled into
the feed mechanism (Double/Chain
errors), turn the knob clockwise
(decrease gap Adjust 1 turn, then
re-test the machine to see if the
problem is corrected. Repeat if
necessary.
NOTE: If the feed gap is adjusted too narrow,
chain error, bill jams and tears can occur.
3b. If Chain error or bill jamming is seen
on the input, turn the knob
counterclockwise (increase gap).
Adjust 1 turn, then re-test the machine.
Repeat as necessary.
NOTE: If the feed gap is adjusted too wide,
double and half errors can occur.
Clockwise
Counterclockwise
Fixing Plate & Screw
4. Fix the adjusted position by
tightening (clockwise) the fixing
plate screw.
IMPORTANT NOTE:
The Kolibri Automatic Bill Counter’s feed
gap adjustment can be sensitive during
adjustments. DO NOT overturn each
adjustment or you may overshoot the
optimum gap. We recommend testing with
a stack of bill after each adjustment turn.
Loading ...
Loading ...
Loading ...